Unplug the power cord from the electrical outlet. 2. Close the main water supply valve. 3. Pull the product forwards by holding both sides of the product while pressing the button at the bottom left of the product, to separate the product from the installation plate. Unplug the product if it will not be used for a long time. Tips .... 4. Remove the drain plug at the back of the bidet by turning it counterclockwise by 90 degrees . and then pulling it forwards . so that the water in the hot water

‘Move’ button Use this button to use the move function. If you press the ‘Move’ button, as the nozzle is moved back and forth while you operate the rear cleansing/front cleansing function, you can clean a wider area. 7 8 ‘Nozzle Position’ button Use this button to control the nozzle position during the rear cleansing/front cleansing operation. You can move the nozzle in 5 levels using the ‘Nozzle Position’ button. ‘Wide’ button Use this button to control the water ejection range when using the c

This may result in corrosion to the metal parts or discoloration or scratches to the bidet body. . Use a soft cloth or sponge to clean the bidet. • This appliance is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not pla

Instant warm water system The water is instantly heated when using the rear and front cleaning functions so that you can immediately use water at your desired temperature. 2. Air+ function The water stream with air bubbles provides softer, stronger cleansing. 3. MESH Filter The MESH filter is a semi-permanent item. You can use the filter repeatedly by cleaning it. 4. Eco mode - Bidet eco mode: If the seat sensor does not detect someone sitting down or no panel or remote control button is pressed

- The remaining water does not mean that the product was previously used. Tips Uninstallation Existing Toilet Seat 1. Remove the fixing nuts of the existing seat and separate the existing toilet seat 1 and the seat cover 2. . Keep the removed seat and the removed seat cover in a shaded place. Installation the Product 1. Turn off the main water supply valve 1 on the water pipe and separate the existing water tank hose 2. 2. Connect the rubber packing, T-shaped connector, and water tank hose to th

7 Signal transmitting status indicator It indicators that you transmit the signal. 8 Battery status indicator The battery status indicator is turned off and on and it notifies the battery replacement time. 9 Warm water temperature adjustment indicator When you press the warm water temperature adjustment button, you can adjust the temperature lamp (L . M . H . Off). OPERATION/ INDICATION PART Operation/indication part Operation Part 1 Stop button Stops all operating functions. 2 Rear cleansing fu

. If the air dryer function selection button is pressed while in cleansing operation, the cleansing function is stopped and drying starts immediately. . Stop If you want to stop the operation in use, press stop button. - It stops all operating functions. . The air dryer function is stopped in 2 seconds after the stop button is pressed. 17 How To Use HOW TO USE | For Rear Cleansing | For Front Cleansing For Front Cleansing . Front cleansing Sit on the seat and press the front cleansing function s

• For your safety and proper use of the product, please read this User’s Manual before use. • Warranty card is included in this User’s Manual. 2 FEATURES 1. WIDE function Users can select the degree of the cleansing water spreading directly as the wanted step from the strong force of the flowing water to the softly spreading water. 2. Special function for the customer’s convenience - Power saving mode : Helps lower the utilities bill. - Seat sensor lock mode : In seat sensor lock mode, as rear c