Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This may result in corrosion to the metal parts or discoloration or scratches to the bidet body. . Use a soft cloth or sponge to clean the bidet. • This appliance is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. save these instructions Safety precautions GROUNDING INSTRUCTIONS • This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape route (wire) for the electric current. This product is equipped with a cord consisting of a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. The improper use of the grounding plug can result in electric shock. • If the repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The insulation wire with an outer green surface with or without yellow stripes is the grounding wire. • Check with a qualified electrician or service technician if you do not understand the grounding instructions completely, or if in you are in doubt whether the product is properly grounded. • This product is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in Figure 1. Grounding Pin Grounded Outlet Figure 1 Extension cord If it is necessary to use an extension cord, use only a three wire extension cord with a three- blade grounding plug, and a three-slot receptacle that will accept the plug of the product. Replace or repair a damaged cord immediately. save these instructions Part Names Dimensions The bidet has the following dimensions. Do not install the bidet when the dimensions of the bidet differ from those of the toilet. >> BA13-AR/BR (Round shape) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 350 mm(13.8 inch) 134 mm(5.3 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 385 mm(15.2 inch) 134 mm(5.3 inch) Rear fixing distance : 164 mm (6.5 inch) 49 mm (1.9 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 350 mm(13.8 inch) 134 mm(5.3 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 385 mm(15.2 inch) 134 mm(5.3 inch) Rear fixing distance : 164 mm (6.5 inch) 49 mm (1.9 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 350 mm(13.8 inch) 134 mm(5.3 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) 411 mm(16.2 inch) 382 mm(15 inch) 202 mm(7.9 inch) 385 mm(15.2 inch) 134 mm(5.3 inch) Rear fixing distance : 164 mm (6.5 inch) 49 mm (1.9 inch) 140 mm ~ 210 mm (5.5 ~ 8.3 inch) >> BA13-AE/BE (Elongated shape) >> Distance between fixing holes >> Bottom view Part Names Front / Rear view 1 12 2 3 13 4 15 14 5 17 7 6 8 11 9 10 16 1 Seat cover 2 Warning sticker 3 IR sensor 4 Nozzle 5 Seat sensor 6 Bidet seat 7 Water tank hose 8 Bidet hose 9 Main water supply pipe 10 Main water supply valve 11 T-shaped connector 12 Power cord 13 Product sticker 14 Drain plug 15 Button 16 Installation plate 17 MESH filter Remote control BA13-AR/AE BA13-BR/BE BA13-A BA13-B BA13-A BA13-B Part Names Installation parts 1 9 8 2 3 7 4 6 5 11 10 13 12 1 2 fixing screws 2 2 fixing rubbers 3 2 fixing washers 4 2 fixing nuts 5 Installation plate 6 2 fixing sliders 7 Rubber packing 8 T-shaped connector 9 Bidet hose 10 Remote control wall mount (including the sticker for attachment) 11 2 screws 12 2 anchors 13 3 batteries (AAA) Check before using your product Please keep in mind! Connect the power. Plug the power cord into the electrical outlet. The bidet only works normally when the electricity is connected. This product is for 120 V~ / 60 Hz only. Make sure to connect the power plug to a grounded electrical outlet (120 V~ / 60 Hz) dedicated to the product. Tips Open the main water supply valve. The bidet only works normally when water is supplied. Check whether the product is in eco mode before using it. - If the seat sensor does not detect anyone sitting down or no panel or remote control button is pressed for approximately 10 minutes, bidet eco mode is activated, the eco mode indicator is turned on, and the seat temperature is set to ‘L’ to reduce the power consumption of the product. - When sitting down on the seat or pressing a panel button, the power indicator is turned on, the eco mode indicator is turned off and the seat temperature returns to the last configured temperature. - Even if you sit down on the seat or press a panel button, the power indicator is not turned on. This means that the power is turned off. In this case, press the power selection button to turn the power on before using it. After the installatio...
Эта инструкция также подходит к моделям:Сантехника - BA13-BR (3.07 mb)
Сантехника - BA13-BE (3.07 mb)
Сантехника - BA13-AE (3.07 mb)