or 2 oz. of citric acid cristal and then fill with water up to the max level indicated and then boil. Allow the contents to cool, and then rinse thoroughly. • Do not use a more concentrated solution. If the filter requires descaling, remove the filter and place into the citric acid solution. • Ensure that the electrical connections are completely dry before using the kettle. • Citric acid crystals are available from most pharmacies. Safety Warnings Please read these instructions before operating

This is the only way to ensure optimum results and maximum safety. Using for the first time • Before use, check that the appliance has not been damaged dur1 2 Fig.1 ing transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer surfaces. • Remove the filter as shown in fig 1 and wash with water (refer to pag 5 “Removing the scale filter”). • Fill the kettle and boil. • The boiled water should be discarded and the kettle rinsed out with cold water.This pr

ji_:iln!=■ itiixjkl dwiïjfi lit obïfifMHj, includmy lie I-jIIuï. il. * ïeud cil iisturîions Miifülij1. * h prar-ect ggairsi rôlf oi obtta -nhork. rio noi inYliRe était mrtw asamfy nf ■:ipp!ionce in wafer or cnry dm lirjd. * (loss Supervisait ta neiEssmy Mrhen cnv ai[.[.< iinte 15 umi! by w m ihidiw. * Unplup fioni uuilsr viïiflfl rmr h use. before !>l 'i il mi № 'uk'ic l'I ports, üfi'J tehe cleaning. ■ ¿vtid contort with rwviis parts tap ¡îonds, hoii. doming, es well 05 spatdos nnrl ■D'he

You should remove and clean the water filter when you notice any deposits being left on the filter or if the pouring efficiency is impaired. Removing the scale filter • Allow the kettle to cool down fully. • Disconnect the appliance from the mains electrical supply. •Make sure that your hands are clean and free from soap, cream or anything which might taint the water. •Empty the kettle and remove the filter by pushing as shown in fig. 1. • Rinse under a tap whilst brushing with a soft brush (fig

You should remove and clean the water filter when you notice any deposits being left on the filter or if the pouring efficiency is impaired. Removing the scale filter • Allow the kettle to cool down fully. • Disconnect the appliance from the mains electrical supply. • Make sure that your hands are clean and free from soap, cream or anything which might taint the water. • Empty the kettle and open the lid. Remove the filter by pushing firmly the catch from inside the kettle, then lift up. • Rinse

This is the only way to ensure optimum results and maximum safety. Using for the first time • Before use, check that the appliance has not been damaged during transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer stainless steel surfaces. • Remove the filter by pushing as shown in fig. 1 and wash with water (fig. 2). Refer to page 5.“Removing the scale filter” • Fill the kettle and boil. • The boiled water should be discarded and the kettle rinsed o

The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below. Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of, (having removed the fuse) and not left where children might find it and plug it into a supply socket - with the obvious consequent danger.

This is the only way to ensure optimum results and maximum safety. Using for the first time • Before use, check that the appliance has not been damaged during transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer surfaces. • Remove the filter by pushing as shown in fig. 1 and wash with water (fig. 2). Refer to page 5.“Removing the scale filter” • Fill the kettle and boil. • The boiled water should be discarded and the kettle rinsed out with cold wat

This is the only way to ensure optimum results and maximum safety. Before use • Check that the appliance has not been damaged during transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer surfaces. • Remove the filter (fig. 1) and wash with water (fig. 2). Refer to page 5.“Removing the scale filter” • Fill the kettle and boil. • The boiled water should be discarded and the kettle rinsed out with cold water.This procedure should be carried out three t

When the water is heated, the minerals in the water solidify, making the water appear cloudy. These minerals form a thin film on the walls,element and on the surface of the water.The water may look like it has white coloured pieces of plastic floating on the surface. On traditional kettle elements, scale forms a hard white “crust” which adversely affects performance and reduces the life of the element. As soon as you notice a film forming on the water, or when cleaning the filter, if you notice