FOV (ft. @ 100 yds.) 1 2 1 Congratulations on the purchase of your Bushnell Night Vision Product. Bushnell Night Vision products are comprised of high quality image intensifier tubes and optics. Bushnell Night Vision products amplify existing light, allowing you to see in dark conditions too dark for the naked eye. HOW NIGHT VISION WORKS Bushnell Night Vision products collect and amplify existing light through the objective lens, which is then focused on the image intensifier. Inside the intensi

4. Press SNAP to take a picture, or press the MODE button quickly to change mode settings as described above. The camera is set at infinity and will not be focused on an object closer than 49 feet. 5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode. The loop order of the different modes is shown here: 6. To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will a

Turn the camera on by pressing and holding the MODE button until the display comes on and the camera beeps. To turn the unit off, press and hold the MODE button until the display goes out. The camera will turn itself off automatically to save batteries if none of the buttons have been pressed for three minutes. ADJUST THE BINOCULAR FOR COMFORTABLE VIEWING Adjust the center focus wheel (located between the eyepieces on the bottom of the camera) while viewing a distant object through the binocular

To avoid any flickering on the picture, the correct power frequency (either 50 or 60) for your country must be selected. 15. If "Delete Last" mode is selected, the display will show the following: delete last picture then quit this mode Press SNAP to delete the last picture from the camera’s memory. 16. If "Delete All" mode is selected, the word "ALL" appears next to the icon on the display. To delete all pictures in the camera’s memory, select this mode. The picture number will then blink. Pres

If you choose to work this way, from a connected camera, be sure that you save the photo (when you are done editing) to your hard drive, and not the camera’s memory or card. To do this in PhotoSuite, after clicking “Done”, answer “Save Changes?” with “Yes”, but then answer “Replace Existing File”? with “No” and use the “Save As” dialog box to save the edited photo in a folder on your hard drive (“Save In>Local Disk”), not the “Removable Disk” (camera). 8. If you are new to photo editing on a com

. . . . . . . . . . . . . . . . . . . . . . . . . 1 FRANCAIS . . . . . . . . . . . . . . . . . . . . . . . . 15 ESPANOL . . . . . . . . . . . . . . . . . . . . . . . . . 33 DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . 51 ITALIANO . . . . . . . . . . . . . . . . . . . . . . . . . 69 PORTUGUES. . . . . . . . . . . . . . . . . . . . . . . 87 11-1210 1LIM.indd 2 11/17/04 9:31:17 AM QUICK GUIDE: BUSHNELL IMAGEVIEW 11-1210 ADJUST THE BINOCULAR FOR COMFORTABLE VIEWING Adjust the center focus

Before using the product, please read the instructions contained in this manual and take time to familiarize yourelf with the different parts and features of the product. CAMERA OPERATION INSTRUCTIONS BUTTON DESCRIPTIONS The MODE button has three functions: 1. Power on: Press and hold button until the camera turns on. When the camera is connected to your PC via the USB cable provided, the camera will power on automatically. 2. Power off: While the camera is on, press and hold the button until ca

The picture number will be automatically increased after deletion is done. 14.When SD card is inserted into the card slot, the SD mark appears on the LCD. The captured pictures will be stored in the SD card once the card is inserted. The captured picture numbers will be different with different memory capacity of the SD card. 15. Press the MODE button until SET mode appears on the LCD. Press SNAP to enter Setting mode. To change the setting of image quality (default setting is High), Storage/PC

When you have completed all of the date/time settings, the display will stop flashing and return to normal. Note that you will need to reset the date/time after replacing batteries. Your ImageView is already set to high resolution and quality right out of the box, and it is not necessary to use the MODE settings and make any changes to get good results by simply pressing the SNAP button to take photos. However, as you might want to shoot a video clip, delete one or more previous photos, or explo

They may then be viewed, edited, renamed and saved using any photo or graphics software that accepts .jpg files. If you do not have software that will open .jpg files, you should install Roxio Photosuite 5 (Windows 98, 2000 or XP only) from the included CD-ROM. See “Software Installation” for instructions. 3. After you have copied or opened and saved the photo files to your computers hard drive, you may disconnect the Imageview camera (NEVER disconnect the camera while files are still being tran