Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Before using the product, please read the instructions contained in this manual and take time to familiarize yourelf with the different parts and features of the product. CAMERA OPERATION INSTRUCTIONS BUTTON DESCRIPTIONS The MODE button has three functions: 1. Power on: Press and hold button until the camera turns on. When the camera is connected to your PC via the USB cable provided, the camera will power on automatically. 2. Power off: While the camera is on, press and hold the button until camera turns off. If camera has not been used or if a button has not been pressed for over 2 minutes, the camera will automatically power off to save battery life. If the camera is connected via the USB cable, it will not power off except when PC is turned off. 3. Mode change: Press this button rapidly to change modes. The SNAP button has two functions: ModeSnap 1. Take a picture: Press this button to take a picture when the camera is on. (But not in the PC mode or mode change. 2. Select: In “Mode Change”, press this button to confirm the function. 11-8313 IMAGEVIEW MANUAL 4-5 LCD DISPLAY 1. High Resolution Mode = 1280x1024 Pixels 2. Low Resolution Mode = 1024x768 Pixels 3. Select the timer to take a delayed picture. This gives you approximately a 10-second delay. 4. This mode allows you to take short movie clips, saved as “.avi” files. 5. Selects different modes. 6. Deletes all the pictures in the memory. 7. Deletes the last picture taken. 8. USB mark appears when USB cord is connected between the camera and the PC. 9. Battery mark keeps track of the battery life left. 10. a. Picture Number-- This area will show the number of pictures in the memory. b. SET-- select Hq (high quality)/Lq (low quality) mode, STO (Mass Storage)/ PCC (PC Cam) mode, 50Hz/60Hz frequency c. FUL--When the memory is full, the display will show “FUL” and alarm will sound. OPERATION GUIDE 1. The camera is powered by two AAA batteries (included) or USB power (included). 2. Insert the battery into battery compartment. 3. Press and hold the MODE button until camera turns on. 4. Press SNAP to take a picture, or press the MODE button quickly to change mode settings as described above. The camera is set at infinity and will not be focused on an object closer than 49 feet. 5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode. 3/11/04, 2:59 PM The loop order of the different modes is shown here: 6. To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by pressing the SNAP button. 7. When in “Normal” mode, press SNAP to take a picture. Press SNAP-> 8. By pressing the MODE button the camera will enter “Mode Change”. 9. To select “Self-Timer” mode, press MODE and the self -timer mark appears, then press SNAP and the camera will take a picture after a 10 second delay. The camera exits self-timer mode automatically after capture is done and the self-timer mark disappears on the LCD at the same time. Press MODE-> press SNAP to capture. 11-8313 IMAGEVIEW MANUAL 6-7 10. Low Resolution mode, will cause your pictures to be of a lower resolution, but will allow you to store many more pictures in the camera’s memory. The default setting is Hi. To change the resolution, press the MODE button until you see the “mode” icon appears. Press the SNAP button, and Lo will appear. The camera is changed from high resolution to low resolution. Repeat the same steps to change the camera back to Hi resolution mode. CAPTURED PICTURES WITH BUILT-IN MEMORY: Pixels (Resolution) 1280X1024(Hi) Image Quality High Quality (HQ) Low Quality (LQ) Captured Picture Quantity Up to 40 pictures Up to 55 pictures 1024X768(Lo) High Quality (HQ) Low Quality (LQ) Up to 55 pictures Up to 85 pictures 11. When in “Normal” mode press the MODE button 3 times to enter the “AVI” mode. The icon will appear. Press the SNAP button to start AVI capturing, and counting. The resolution for AVI is 320X240 pixies. The memory of the camera can hold from 40-70 seconds of live action. It depends on what objects you are capturing and the lighting conditions. 3/11/04, 2:59 PM 12. To delete all pictures in the camera’s memory, select the “Delete All” mode. This represented by the trash can icon. Press the SNAP button to confirm. The picture number will then blink. You will hear a tone that becomes higher as the pictures are deleted. Once complete, the picture number will reset to possible captured numbers. 13. If the “delete Last” icon appears, the display will show the following: Press SNAP to delete the last picture in the camera’s memory. The picture number will be automatically increased after deletion is done. 14. Press the MODE button until SET mode appears on the LCD. Press SNAP to enter Setting mode. To change the setting of image quality (default setting is High), Storage/PC Cam (default setting is Storage), 50 Hz/60 Hz frequency (default ...