The following is the LCD display that appears on your camera-see Figure 3. Located below are the LCD icons and their explanation. Figure 3 Self Timer: Use the Self Timer to allow for a time delay before the camera automatically takes a picture. What to do: Focus the camera on what you want to take the picture of. If a self -portrait, focus the camera on the spot where you plan to stand. Set the LCD display to Self Timer. Press the Shutter Button. The camera will beep for about 10 seconds allowin

4. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. 5. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. 6. Your binoculars are n

You should be able to view with both eyes open as you would when seeing normally. Step 2^ Located in-between the eyepieces in the middle of the binoculars is a knurled wheel. This is the focusing mechanism. While holding the binoculars up to your eyes, turn the center focusing mechanism. Turning this mechanism will quickly bring your target into focus. Step 3) For fine-tuning; there is a smaller mechanism located on the right eyepiece tube. Turn this wheel for small adjustments in viewing.