Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
! While the port replicator is attached to you computer, you cannot use the following ports. -HDMI output port on your computer -MONITOR port on your computer - LAN port on your computer Simultaneous use of the MONITOR port and the HDMI output port on the port replicator is not possible. Using Peripheral Devices > Connecting a Port Replicator n101 N Attaching Your Computer to the Port Replicator ! Be sure to install the battery pack(s) before attaching your computer to the port replicator. To attach your computer to the port replicator ! If the AC adapter is supplied with your port replicator, be sure to use it to connect the port replicator to a power source. If not, use the AC adapter supplied with your computer. To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator. Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units. The monitor port, the HDMI output port, and the LAN port on your computer is not accessible when the computer is attached to the port replicator. Use the MONITOR port, the HDMI output port, or the LAN port on the port replicator for connection. 1 Shut down the computer, close the LCD screen lid, and disconnect all peripheral devices and the AC adapter. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator. Using Peripheral Devices > Connecting a Port Replicator n102 N Remove the port replicator connector cover from the bottom of the computer. ! You may find it difficult to remove the port replicator connector cover, as it is tight in place on your computer. Do not exert extra pressure when removing the cover so as not to damage the computer or the port replicator connector cover. Be sure to keep the removed port replicator connector cover for future use. Using Peripheral Devices > Connecting a Port Replicator n103 N Align the rear bottom corners of the computer with the guides on the port replicator. . If an optional extended battery pack is attached to your computer, slide the tab (1) in the direction of the arrow to lift the connector (2) on the port replicator to attach the computer. Using Peripheral Devices > Connecting a Port Replicator n104 N ! Be sure to slide the tab (1) to the end. If not, the connector (2) is not locked in the correct position, resulting in a contact failure between your computer and the port replicator. When the extended battery pack is not attached to your computer, slide the tab (1) in the opposite direction of the arrow to lower the connector (2). Attaching the computer while the connector (2) is in the lifted position may damage the connectors. Gently push down the computer until it clicks into place. Lift open the LCD screen lid and turn on the computer. Using Peripheral Devices > Connecting a Port Replicator n105 N Disconnecting Your Computer from the Port Replicator ! To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator. When the battery pack is running out of power, disconnecting your computer from the port replicator may result in loss of unsaved data. To disconnect your computer from the port replicator 1 Lift the computer away from the port replicator. Using Peripheral Devices > Connecting a Port Replicator n106 N Replace the port replicator connector cover on the bottom of the computer. . It is extremely important that you replace the port replicator connector cover after disconnecting your computer from the port repli...
Эта инструкция также подходит к моделям:Ноутбуки - VPCSA3C5E (3.09 mb)
Ноутбуки - VPCSA3J1E_XI (3.09 mb)
Ноутбуки - VPCSA3L9E_XI (3.09 mb)
Ноутбуки - VPCSA3M9E_XI (3.09 mb)