Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Check the settings on the VAIO Control Center. What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode? . This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again. If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again. For information on how to install and remove the battery pack, see Installing/Removing the Battery Pack (page 21). . If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 5). Troubleshooting > Built-in Camera n171 N Built-in Camera Why does the viewfinder show no images or poor-quality images? . The built-in camera cannot be shared by more than one software application. Exit the current application before launching another. On models with Media Gallery, you cannot use another camera application that uses the built-in camera while using the gesture function of Media Gallery. . The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This is normal and does not indicate a malfunction. . If the problem persists, restart your computer. Why is the video input from the built-in camera suspended for a few seconds? The video input may be suspended for a few seconds if: . a shortcut key with the Fn key is used. . the CPU load increases. This is normal and does not indicate a malfunction. Why are captured images poor in quality? . The images captured under the fluorescent light may show reflections of light. . A dark portion in captured images may appear as a noise. . The area on and around the built-in camera is dirty. Clean the area. See Care and Maintenance Information (page 144). Troubleshooting > Built-in Camera n172 N What should I do if captured images contain dropped frames and audio interruptions? . The effect settings on your software application may cause dropped frames. See the help file included with your software application for more information. . There may be more software applications running than your computer can handle. Exit the applications that you are not currently using. . This problem may occur while your computer is running on the power saving plan, which reduces the CPU performance. See Selecting a Power Plan (page 129) to check the current power plan. What should I do if movie playback shows dropped frames while my computer is running on battery power? The battery pack is running out of power. Connect your computer to an AC outlet. What should I do if captured images flicker? This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output frequency and the shutter speed. To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate flicker noise. Troubleshooting > Networking (LAN/Wireless LAN) n173 N Network...
Эта инструкция также подходит к моделям:Ноутбуки - VPCSA3C5E (3.09 mb)
Ноутбуки - VPCSA3J1E_XI (3.09 mb)
Ноутбуки - VPCSA3L9E_XI (3.09 mb)
Ноутбуки - VPCSA3M9E_XI (3.09 mb)