|
Фрагмент инструкции
Using a fingernail, lift the battery cover off. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. Align the cover tabs with the remote control and press down until the cover clicks. The remote control will operate the VOH1012 and most Audiovox VCP’s. It is not a universal remote control and will not control equipment from other manufacturers. -6128- 7288 6 of 16 Remote Control Function Descriptions *Function control is available on the unit and the remote control. ** Not used in this model *** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT) is installed. 1. POWER Button* 5. ERASE/WRITE Button*** Press this button to turn the VOH1012 on. Press the While tuned to a channel, pressing this button will store button again to turn the VOH1012 off. or erase the channel from memory. The stored channel numbers are displayed in “GREEN” and the erased 2. SOURCE Button* channel numbers are displayed in “RED”. Each time the button is pressed, the audio / video source will change: DVD, AV1, AUX and TV***. 6. Channel Up ( ) Button*** Use this button to increase the channel number to the desired 3. AUTO MEMORY Button (AUTO PROGRAM Button)*** channel. When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals 7. MUTE Button of sufficent levels are automatically stored. Press this button to mute the audio. Pressing the button again restores the audio to the 4. SKIP/SEARCH Button*** previously set level. This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop only on 8. ENTER Button** channels that are programmed into memory when CHANNEL UP/DOWN buttons are used. In search mode, 9. LEFT ( ) Button** the TV tuner will stop on all active channels. 10. MENU Button** 11. RETURN Button** -7 128-7288 7 of 16 12. TV Mode Select Button*** Switches certain function keys on the remote control for TV functions. 13. DVD Mode Select button** 14. DISPLAY Button** 15. FM TRANSMITTER ON/OFF Button Turns the FM Modulator ON/OFF. 16. Audio button** 17. ZOOM Button** 18. PAUSE ( ) Button** 19. STOP (• ..........) Button** 20. PREVIOUS ( ) Button** 21. NEXT ( ) Button** 22. REV ( ) Button** 23. FWD ( ) Button** 24. PLAY ( )Button** -8 25. ANGLE Button** 26. SUBTITLE Button** 27. SOURCE SELECT Button** 28. CHANNEL SELECT Button* (FM Select) Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz, Frequency 4, 89.5MHz, Frequency 5, 89.9MHz). 29. VCP Mode Select button Switches certain function keys on the remote control for VCP functions. 30. Screen Mode Button Allows the user to change the screen aspect ratio to either 4:3 or 16:9. 31. A-B Button** 32. REPEAT Button** 33. Channel Down ( ) Button*** Use this button to decrease the channel number to the desired channel. 128-7288 8 of 16 34. SETUP Button** 35. RIGHT ( ) Button** 36. PIX Button (PICTURE SELECT) Each time this button is pressed, th...
Эта инструкция также подходит к моделям:Мониторы - VOH1012 (85.62 kb)
Мониторы - VOH1012 S (85.62 kb)
Мониторы - VOH1012 (85.62 kb)
Мониторы - VOH1012 S (85.62 kb)