Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
SP C210SFQuick Setup Guide Installing the Drivers & Software Setting Upthe machine Windows ® USB Windows ® Parallel WindowsNT ® 4.0Parallel ForNetwork Users Windows ® Network Step 1 Setting Up the machine Step 2 Installing the Drivers & Software Setup is Complete! Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for quick and easy reference at all times. Read this manual carefully before you use this product and keep it handy for future reference. For safe and correct use, please be sure to read the Important Information in “User’s Guide” before using the machine. Warning Caution Important Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds, damage to originals, or loss of data. Be sure to read these explanations. Improper Setup Note User’s Guide Alerts you to devices and operations that are not compatible with the machine. Indicates notes and useful tips to remember when using the machine. Indicates reference to the User’s Guide. 1 Carton components may differ from one country to another. Save all packing materials and the carton. *1 The toner cartridges that are supplied with this machine, are starter cartridges. Starter cartridges have approx. half the page yield of the standard toner cartridge, 1,500 pages (Black) and 1,500 pages (Cyan, Magenta and Yellow) at approximately 5% print coverage (Letter size). Carton Components Quick Setup Guide CD-ROM User’s Guide OPC Belt Cartridge AC Power Cord Telephone Line Cord Toner Cartridges (Black, Cyan, Magenta and Yellow)*1 The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (Parallel, USB or Network). Do NOT connect the interface cable at this time. Connecting the interface cable is done during the software installation process. ¦ USB interface cable Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2.0 meters). When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-powered USB hub. ¦ Parallel interface cable Please make sure you use a Parallel interface cable that is no longer than 6 feet (2.0 meters). Use a shielded interface cable that is IEEE 1284-compliant. 1. Automatic Document Feeder (ADF) 2. Control Panel 3. Face-down Output Tray with Support Flap (Support Flap) 4. Front Cover 5. Paper Tray 6. Power Switch 7. Back Cover 8. Document Cover 9. ADF Document Output Support Flap 1 6 9 2 3 4 5 8 7 ¦Getting Started 2 Control Panel 1 One Touch keys 2 Job Cancel key 3 Fax and telephone keys 4 Liquid Crystal Display 5 Secure Print key 6 Dial Pad 7 Stop/Exit key 8 Start keys 9 Navigation keys 10 Mode keys 11 Copy keys 12 Shift key For the details of the control panel, see "Control panel overview" in Chapter 1 of the User’s Guide. ¦ This machine is heavy and weighs approximately 76.7 lb (34.8 kg). To prevent injuries, use at least two people to lift the machine. ¦ When you lift the machine make sure you use the handholds at the bottom four corners of the machine. 12 11 10 9 1 2 3 4 5 6 7 8 Table of Contents Table of Contents Step 1 Setting Up the machine 1. Install the Toner cartridges...............................................................................4 2. Remove the protectiveparts of the FusingUnit.............................................5 3. Install the OPC Belt Cartridge...........................................................................6 4. Load Paper in the Paper Tray ...........................................................................7 5. Install the Power Cord and Phone Line ...........................................................8 6. Setting the Date and Time.................................................................................9 7. Setting your Station ID ......................................................................................9 8. Selecting a Receive Mode...............................................................................10 9. Selecting Your Language................................................................................11 10. Setting the LCD Contrast ................................................................................11 Step 2 Installing the Drivers & Software Supplied CD-ROM “Multi-Function Suite”.....................................................................12 For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP)....................................................14 For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP).....................................................