Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
System adjustments can be accomplished using the remote control, while seat- belts remain fastened. Enjoy your Audiovox entertainment system but remember the safety of all passengers remains the number one priority. Features • •••••10.2 Inch TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor • •••••OSD (On Screen Display) for Control of Picture Quality and Functions • ••••• Input for Optional TV Tuner* • •••••Full Function Remote Control • •••••Infrared Transmitter for IR Wireless Headphones • •••••Three Audio / Video Inputs (AV1/AV2/AUX) • •••••Built-in Five Frequency Wireless FM Modulator (**Optional Relay Box) • •••••Forward and Rear Remote Sensor • •••••Dome Lights with 3-Position Switch • •••••Backlit Controls for Low Light Operation Options * Audiovox P/N PODTVT ** Audiovox P/N SIRSWB -3 128-7288 3 of 16 Controls and Indicators Diagram PICTURESELECTFMMSELECTIRTON/OFFAUX1 2 3 4 12 13 11 9 PICTURESELECTFMMSELECTIRTON/OFF 14 3 7 5 6 10 8 -4 128-7288 4 of 16 Control Function Descriptions 1. POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off. 2. Infrared Transmitter and Sensor – Use to transmit audio to the wireless headphones. Also allows the remote control to operate the VOH1012 and to control other accessories in the system. 3. Dome Lights – Provide additional interior illumination. 4. SOURCE Select – Used to select one of the three sources ( AV1,AV2, AUX, *TV Optional). 5. ( + ) Button – Used to increase levels in the picture adjustment mode. 6. PICTURE SELECT Button – Allows the user enter the picture adjustment mode. 7. ( – ) Button – Used to decrease levels in the picture adjust mode. 8. Auxiliary A/V Input – Allows input from an external source using the supplied A/V adapter cable. 9. Rear Infrared Sensor –Allows the remote control to operate the VOH1012 and other accessories. 10. Drop Down LCD Panel. 11. Screen release – Moves in direction of the arrow to release the drop down screen. 12. FM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through the available FM frequencies (Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz and OFF). 13. IRT ON/OFF – When this button is pressed it will turn the IR Transmitter ON/OFF for use with IR Wireless Headphone Channel A. 14. Three position Dome Light Switch* • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The dome lights will not turn on in this position. • On – Turns on the dome lights. *Refer to Installation Guide for wiring instructions. -5 128-7288 5 of 16 Remote Control Operation BATTERY COVER Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) 2) 3) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. Align the cover tabs with the r...
Эта инструкция также подходит к моделям:Мониторы - VOH1012 (85.62 kb)
Мониторы - VOH1012P (85.62 kb)
Мониторы - VOH1012 (85.62 kb)
Мониторы - VOH1012 S (85.62 kb)