Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit. *NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod. If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product. -11 128-7288 11 of 16 Remote Sensor Eye AV1 / AV2 Input The AV1 and AV2 video input may be connected to a DVD Player, Video Cassette Player (VCP), video game system, or other audio / video devices. To access the AV1 or AV2 input, turn the VOH1012 on and press the source button on the VOH1012 or the Source button on the remote control until “AV1” or “AV2” is displayed on the screen. Turn the video source component on with its power button or remote control. The VOH1012 is now ready to play the audio and video signals from the source connected to the AV1or AV2 input. The AV1 or AV2 input requires a 8010730 cable. AUX A/V Input The VOH1012 will accept an audio/video input through the 1/8 jack* located on the bottom of the screen housing. The audio / video device could be a video game system, video camera, or other input device. Audio/Video Out The VOH1012 provides an AV output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details.) This output will provide an A/V signal that duplicates the signal processed by the VOH1012 to an additional monitor or video display. The audio signal can also be used to feed an AUX input on a vehicle radio if available. Please see your installer for more information. *Use with supplied AV adaptor cable. -12 128-7288 12 of 16 Troubleshooting PROBLEM SOLUTION Poor in-vehicle •Check the condition of the vehicle’s radio reception radio antenna. •Verify that the antenna is fully raised. •If a relay box (SIRSWB) has beeninsatalled, make sure that the FM Modulator is turned OFF. •If a wired FM modulator has been installed, verify that it is turned OFF by using the remote or switch. IR sensor • Verify that the batteries in the remoteinoperative are fresh. •Verify that the remote sensor eye isnot obstructed. •Verify that the infrared transmitter isaffixed over the sensor eye of thecomponent to be controlled. -13 128-7288 13 of 16 Replacement Parts Remote Control 1363855 SpeciLCD Backlighting fications CFFL A/V Adapter 1123227 Resolution 800 x 480 Pixels 1,152,000 Operation Temperature 32 -140. F (0 - 60. C) Storage Temperature -4 - 158. F (-20 - 70. C) Backlight life 30,000 Hours Video Display System NTSC/PAL Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimensions W X H X...
Эта инструкция также подходит к моделям:Мониторы - VOH1012 (85.62 kb)
Мониторы - VOH1012 S (85.62 kb)
Мониторы - VOH1012P (85.62 kb)
Мониторы - VOH1012 (85.62 kb)