28. Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do NOT wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level. 29. Always release the hand grip trigger when cutting is delayed or when walking from one cutting location to another. To reduce the risk of elctrocution, keep all connections dry and of the ground. Do not touch the plug with wet hands. 2 OPERATING INSTRUCTIONS 10. Press on the head angle release button to change the angle

Never immerse trimmer head in water. 3. Regularly clean the trimmer line and spool housing using a soft brush or dry cloth. Care, Maintenance & Storage SAFETY & WARNING INSTRUCTIONS 34. Maintain the grass trimmer with care. Use only manufacturer’s replacement parts. Follow instructions for changing trimming line. Keep handles dry, clean and free from oil and grease. Always use a clean cloth when cleaning. 35. This appliance is double insulated to protect you from electrical shock. 36. Store the

Batteries discharge at a rate of about 1% per day. Charge the battery every six months even if it is unused to maximize battery life. Do not tape the trigger in the “ ON” position and leave the tool unattended as this may discharge the battery to a point where it will no longer be able to recharge. Store your battery pack in a cool, dry place. Do not store it in a place where the temperature will exceed 120° F (50°C) such as a vehicle or metal building during the summer. High temperatures will o

No other express warranty or guaranty, whether written or oral, except as mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product shall bind Troy-Bilt LLC. During the period of the Warranty, the exclusive remedy is repair or replacement of the product as set forth above. (Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.) The provisions as set forth in this Warranty provide

x .060 12 714-0105 Sq.Key 3/16 x 1.0" Lg.* 47 710-0623 Hex Wash. Hd. Self Tap Scr. 13 710-0938 Set Scr. 1/4-28 x 1/4" Lg. Hex Bolt 5/16-18 x 1.50* Lg.* 3/8-16 x .75" Lg. 14 710-0442 48 738-0108 Shoulder Bolt .498" Dia. x 15 711-0421 Engine Pulley 1.450 16 08253 Bearing Housing 49 734-1176 Wheel Ass'y. Comp. 7" Dia. 17 736-0242 Bell.-Wash. .34" I.D. x 88" x 1.50 O.D. x .060 50 736-0105 Bell.-Wash. .400" I.D. x 88" 18 710-0528 Hex Bolt 5/16-18 x 1.25"

Make certain that all loose parts and literature are removed from carton before carton is discarded. 4 FIGURE 3. 2. Place lower handle into the slots in the rear frame. See figure 3. 3. Line up holes in handle with holes in frame. See figure 3. 4. Secure rear wheels (W) and lower handle (T) to frame with shoulder bolts (A), belleville washers (B) (cupped side of washer against the frame), lock washers (C) and hex nuts (D). See figure 3. FRONT WHEEL BELLEVILLE WASHER (B) HEX NUT. '(D) 5

770-5200D NDEX Safe Operation Practices.....................3 Assembly Instructions.................... . . 4 Operation ............................... 7 Adjustments............................. 7 Lubrication.............................. 8 Maintenance ............................ 8 Off-Season Storage........................ 9 Trou be Shooting Chart.................... 9 Illustrated Parts..........................10 Replacement Parts List....................11 A Instructions given wi

See figure 14. FIGURE 14 3. Lift off the hex castle nut, belleville washer and belt cover. See figure 15. 4. Remove the old belt and replace with new belt. ■^NOTE While the belt cover is removed, it is a good idea to apply a little grease to the pivot point on belt cover. See figure 15. 5. Reassemble the belt cover, making sure the r>' belt is over the engine pulley. 6. When tightening the castle nut, only tighten enough to line up hole in bolt for cotter pin. DO NOT OVERTIGHTEN. Belt cov