c. After striking a foreign object: inspect the cutting part for damage and make repairs before restarting and operating the unit. d. If machine starts to vibrate abnormally (check immediately). e. Whenever you leave the unit. 35. Securing the extension cord. Bend the extension cord about 40 cm from the plug end. Push that bend through the oblong opening, then loop the bend under the cord retaining clips as shown. This will prevent the extension cord from detaching from the hedge trimmer plug. K

A. Special safety information WARNING DANGER ATTENTION: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS. WHEN YOU SEE THIS SYMBOL HEED ITS WARNING! STAY ALERT! WARNING DANGER READ & UNDERSTAND THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. TO REDUCE THE POTENTIAL FOR ACCIDENTS, COMPLY WITH THE SAFETY INSTRUCTIONS IN THIS MANUAL. FAILURE TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY AND OR EQUIPMENT AND PROPERTY DAMAGE. No. 331600 - Warning label Serial Number label SAFETY SYMBOLS

Keep the cord away from heat, oil and sharp edges. 11. Maintain tool with care. Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged, have it repaired by an authorised service facility. Inspect extension cords periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease. 12. Disconnect tools. When not in use, before servicing and when changing

Double sided, Double-reciprocating 10.7 HC-150i 21.2 Rotary 16.9 Standard 20 N.A. Double sided, Double-reciprocating 11.3 HC-165 21.2 Rotary 16.9 Standard 24 N.A. Double sided, Double-reciprocating 12.1 HC-185 21.2 Rotary 16.9 Standard 30 N.A. Double sided, Double-reciprocating 12.6 HC-235 21.2 Rotary 15.9 Standard 30 N.A. Single sided, Double-reciprocating 12.8 HC-245 21.2 Rotary 15.9 Standard 40 N.A. Single sided, Double-reciprocating 14 SHC-212 21.2 Rotary 15.2 Standard 20 20 Double sided, Do

Keep it in a safe place for future reference. It contains specifications and information for operation, starting, stopping, maintenance, storage and assembly specific to this product. Grass Trimmer/Brush Cutter Operator's Manual MODELS SRM-225 the safety manual WARNING Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serous injury. X772

The following is an explanation of those symbols and key words. CIRCLE AND sLAsH syMbOLThis symbol means the specific actionshown is prohibited. Ignoring theseprohibitions can result in serious or fatalinjury. NOTE This enclosed message provides tips for use, careand maintenance of the unit. IMPORTANT The enclosed message provides information necessary for the protection of the unit. InTernaTIonal symbols Symbol form/shape Symbol description/application Symbol form/shape Symbol description/appli

1. Move stop switch to stop position. 2. Disconnect spark plug wire from spark plug. 3. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 4. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 5. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated. 6. Wipe excess oil from the blade before putting the unit back in service. Gear Box Assembly Level 1. Parts required: POWER BLENDX

Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline and remix. 5. Install fuel container cap and wipe any spilled fuel from container and surrounding area. Handling Fuel WARNING DANGER Fuel isVERYflammable. Use extreme care when mixing, storing or handling, or serious personal injury may result. • Use an approved fuel container. • DO N

Use of alternative fuels may cause performanceproblems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components. Gasoline -Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether

If blades move, readjust carburetor according to these instructions, or see your ECHO Dealer Engine Break-InNew engines must be operated a minimum duration of two tanks of fuelbreak-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissionswill stabilize. Idle speed can be adjusted as required. 2020 High Altitude Operation This engine has been factory adjusted to maintain satisfactory starting, emission, and durability pe