If the trouble cannot be solved, or if you have a problem other than those described hereunder, please contact our technical service or your nearest dealer. TROUBLE CAUSES REMEDY Low surface quality (at aluminum and similar materials) : Rough surface, Large chip, Not cooling the saw blade surfaces Lubricating the saw blade cutting surfaces, Using of cooling liquid Not homogenous surface, Saw blade traces visible Using of damaged or blunt saw blade Check the saw blade teeth. Replace if necessary.

6.8.5. Ensure that the machine has been cleaned, tested and maintained before starting to operate. 6.8.6. Check the safety devices, power cable and moving parts regularly. Don’t operate the machine before having replaced defective safety devices or faulty parts. 6.8.7. Never replace the saw blade before unplugging first. 6.8.8. Keep foreign materials away from the working area of the machine, keep away from the machine’s moving parts. IMPORTANT The safety data have been defined above. In order t

IMPORTANT Serrez les vis graduellement tour a tour. ¦ RACCORDEMENT DU CABLE D’ACCELERATEUR 1. Enlever le capot du filtre a air. 2. Raccorder l’extremite du cable d’accelerateur dans sa fixation sur le dessus du carburateur. (SE2) ¦ RACCORDEMENT DES FILS ELECTRIQUES • Relier les fils electriques entre le moteur et la machine en faisant correspondre les couleurs de fils. ¦ MISE EN PLACE DE LA POIGNEE • Monter la poignee sur le bras de l'appareil et la positionner pour avoir une prise confortable e

Children should not be allowed to operate this unit. ■ PLAN AHEAD 1. Dress in a long-sleeved shirt and long pants. Wear protective gloves and shoes. Eye and ear protection should be worn at all times. Do not wear loose clothing, jewelry, short pants or sandals. Do not go barefoot. 2. Guard against hazardous situations at all times. Warn adults to keep pets and children away from the work area. Establish a safe method for gaining your attention during operation. Be careful if you are approache

Minimum Gauge for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 (0-7.6m) (7.6-15.2m) (15.2-30.4m) (30.4-45.7m) 240V 0-50 51-100 101-200 201-300 (0-15.2m) (15.2-30.4m) (30.4-60.9m) (60.9-91.4m) Ampere Rating More Not more American Wire Gauge Than Than 0 -6 18 16 16 14 6 -10 18 16 14 12 10 12 16 16 14 12 12 16 14 12 Not Recommended WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK: • Do not connect to AC distribution wiring. • Do not make any electrical connections or dis

CAUTION — RECHARGEABLE DEVICES • Certain rechargeable devices are designed to be charged by plugging them directly into an AC receptacle. Thesedevices may damage the inverter or the charging circuit. • If there is any sign that your appliance is behaving differently to that when connected to the normal power sourcethen unplug and seek advice from your appliance manufacturer. • This problem does not occur with most of the battery-operated equipment. Most of these devices use a separatecharger or

5.2.2. Use a connection cable socket in accordance with the CE Safety Directives. 5.2.3. Check the inlet power supply before powering the machine. See Page 19 Item 3.8.3. CAUTION! * The socket connections have to be made by a qualified electrician, the rotation direction of the saw blade has to be observed by starting the machine. If the saw blade rotates in reverse direction, the socket connections have to be checked and re- connected properly. **If the saw blade rotates in reverse direction, i

Introduction 3 1.2. Manufacturer 3 2. Machine’s description and purpose of use 3 2.1. Machine’s description 3 2.2. Technical features 5 2.3. Cutting diagram 6 2.4. Overall dimensions 7 2.5. Part lists and technical drawings 8 3. Safety 10 3.1. Safety information 10 3.2. Accident prevention 10 3.3. General safety information 11 4. Transport of the machine 12 5. Installation of your machine 13 5.1. Preparation 13 5.2. Electric connection 14 6. Machine safety information 15 7. Operation 16 7.1. Air

(4) Let the tool charge initially for at least 10 hours. After the initial charge, your tool should be fully charged in 10 hours from a fully discharged condition. Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use. WARNING: Do not use tool while it is connected to the charger. WARNING: Fire Hazard. When disconnecting the

Variable speed switch 2. Lock-on button 3. Saw blade locking lever 4. Saw blade support roller 5. Dust blower 6. Shoe plate 7. Dust extraction port 8. Saw blade storage compartment USE OF EXTENSION CORDS Make sure the extension cord is in good condition before using. Always use the proper size extension cords with the tool – that is, proper wire size for various lengths of cord and heavy enough to carry the current the tool will draw. Use of an undersized cord will cause a drop in line voltage r