Position the Vertical Cutting Plate Support against the Body Frame (60). Then firmly re-tighten the Hex Head Bolt. (See Figures I and J.) OPERATING INSTRUCTIONS CAUTION! Turn the Power Switch (164) to its “OFF” position and unplug the tool from its electrical outlet prior to making adjustments to the tool. To Use The Vise: Raise the Body Frame (60) to its 1. vertical position, and lock the Body Frame in place with the Support Plate (150) and Locking Pin (153). (See Figure H.) FIGURE KMOVEABLE VI

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Additional Safety Rules for Jig Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Functional Description and Specifications . . . . . . . . . . . . . . . . . . . . . . . . .8 Parts and Features Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Use of the power tool for operations different from those intended could result in a hazardous situation. Service5. Have your power tool serviced by a a. qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Jigsaw Safety Warnings Hold power tool by insulated 1. gripping surfaces when performing an operation where cutting tool may contact hidden wiring or its own cord. Contact with a .live. wire will make exposed metal p

3. Wear suitable gloves to reduce the vibration effects on the user. 4. Use tools with the lowest vibration when there is a choice between different processes. 5. Include vibration-free periods each day of work. 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. SAFETY SETUP OPERATION MAINTENAN

11. Adjust the Saw Blade to 45 degrees. Raise and lower the Saw Blade through the full range. Readjust the Saw Blade to 90 degrees, then raise and lower the Saw Blade through the full range. There should be no contact between the Saw Blade, the Main Table, the Table Insert, or any other part of the Table Saw. If there is contact, have a qualified service technician make the necessary adjustments before using the Table Saw. To AdjustThe 45 Degree And 90 Degree Positive Stops: 1. The Stops have be

To prevent serious injury from accidental operation: Unplug power cord from power source before making any adjustments to this tool. Work Piece and Work Area Set Up Designate a work area that is clean 1. and well-lit. The work area must not allow access by children or pets to prevent injury and distraction. Route the power cord along a safe 2. route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area wit

With wider material you must move the Blade across the material to cut it. Do not bear down on the material, use light downward pressure. If the material binds the blade, release the trigger. Keep your hands away from the Blade. When the cut is completed, raise the 10. blade assembly, wait for the Blade to stop turning, release the Hold Down Vise and remove the work material from the saw. The laser guide will not turn off 11. automatically. Turn the laser guide off using the switch on the side o

Follow instruc2. tions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY General RULES AND PRECAUTIONS Maintain labels and nameplates on the Cut Off Saw.1. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Industrial applications must follow OSHA guidelines.2. Never stand on the Cut O

® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. © Copyright 2006 by Harbor Freight Tools® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS SAVE THIS MANUAL Item Description Electric

2) To cut several pieces of the same size, loosen the Miter Gauge and slide it along the fence until it is at the desired distance from the slot in the middle of the table. Tighten the Miter Gauge in place. Position the tile against the fence and against the miter gauge when cutting. Additional tiles cut in the same way will have the same dimension. 3) To cut pieces at an angle, adjust the Miter Gauge so it is the desired distance from the slot at the middle of the tile. Loosen the knob at the t