Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Fireplace secured to framing by nailing flanges (Left side front corner of fireplace shown. Right side requirements are the same.) SUPERIOR® B-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS 8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Control Compartment Panel Hood Glass Door Header Spacing Top Standoffs Flush Nailing Flange 1/2” Nailing Flange 5/8” Nailing Flange Glass Door Spring Latch *IMPORTANT! Bend up the Top Standoff Spacers before installation. Use outer pair for 1/2" materials and inner pair for 5/8" materials. Top Standoff Spacers* Control Compartment Panel Hood Glass Enclosure Spring Latch Panel Lower Enclosure Panel Flush Nailing Flange 1/2" Nailing Flange 5/8" Nailing Flange SUPERIOR SUPERIORB-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS fIREPLACE ANd fRAMING SPECIfICATIONS NOTE: Diagrams, illustrations and photographs are not to scale. Product designs, materials, dimensions, specifications, colors, and prices are subject to change or discontinuance without notice. Input (BTU/HR) -MV & Electronic Natural & Propane Gas Models Input Rate (BTU/hr) SLBV-35N 17,000 SLBV-35P 17,000 SLBV-40N 22,000 SLBV-40P 20,000 Figure 8-1 framing dimensions Model No. A B C SLBV-35 in. 35-1/435-1/416 mm 895 895 406SLBV-40 in. 40-1/440-1/416 mm 1022 1022 406“C”istherequiredframingdepthdimension when the finish material (drywall) thickness is1/2in.(13mm). fIREPLACE fRAMING SPECIfICATIONS Construct framing with 2x4 or larger lumber. ABCA1/2Corner framing dimensions Model No. d E f G SLBV-35 in. 35-1/457-1/2 40-5/828-3/4mm 895 14611032730SLBV-40 in. 40-1/461-13/1648-11/3230-11/16mm 1022 15541101 779 F Back wall of chase/enclosure (including any finishing materials) G D E CORNER fRAMING dIMENSIONS NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIORSUPERIORB-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS VERTICAL VENTING THROUGH CEILING frame Ceiling Opening: To locate the center of the vertical run, use a plumb line from the ceiling above the appliance. Model No. in. mmSLBV-35 32-1/4 819 28-1/8 714 23-1/4 590 32 813 35-1/4 895 25 635 12-1/2 317 33 838 SLBV-40 37-1/4 946 33-1/8 841 28-1/4 718 37 940 40-1/4 1022 30 762 15 381 38 965 in. mmH J L M N P QK M Front View H L K J Q N P Top View Flue Outlet for B-Vent Connection: 35 Models = 4 in. (102 mm) 40 Models = 5 in. (127 mm) 9-1/4 in. (235 mm) 1/2 in. (13 mm) 1-5/8 in. (42 mm) Right Side View 9-1/2 in. (241 mm) Optional Electrical Inlet Knockout requiring a field-provided Junction Box (Either Side) ELECTRICAL INLET 2-3/4 in. x 2 in. (70 mm x 51 mm) COVER PLATE with KNOCKOUT (Right Side) 16 in. (406 mm) Hood Left Side View 5-7/8 in. (149 mm) *NOTE: It is recommended that gas be stubbed in from LEFT side only. 3 in. (76 mm) 9-1/2 in. (241 mm) GAS INLET KNOCKOUT* 7-3/8 in. (187 mm) Hood 7-1/8 in. (181 mm) 5-7/8 in. (149 mm) 3 in. (76 mm) 16 in. (406 mm) fIREPLACE SPECIfICATIONS Figure 8-2 NOTE: DIAGRAMS & ILLUSTRATIONS A...
Эта инструкция также подходит к моделям:Камины - SLBV-35NE (2.89 mb)
Камины - SLBV-35NE (2.89 mb)
Камины - SLBV-35NE (2.89 mb)
Камины - SLBV-35NE (2.89 mb)