No heating will occur in this mode. 4. For models with the Oscillating feature, slide the lever on the base of the unit to “Oscillation On” (C). 5. For models with a built-in Digital Thermometer, consult the thermometer to see the area temperature. Depending on the model, it will be displayed in either °F or °C (D). The digital thermometer runs on batteries and is not affected by whether or not the unit is plugged in. The batteries are already installed. To activate the thermometer, turn the uni

2. Motion-off detection feature: Cuts the power if unit falls over in any direction or is lifted (such as if you move it to another part of the room). 3. Tip-over switch: Cuts the power if unit is knocked over forward or backward. Both are controlled by the tipover switch on bottom of unit. Do not attempt to defeat this safety feature. Care and Cleaning This appliance is permanently lubricated and will not require additional lubrication for the life of unit. It contains no user serviceable parts

A circuit overload could occur. 1. Be sure dial is in OFF position before plugging in unit. Plug into an AC outlet. For 100HF, 101HF models, choose HIGH for large rooms and LOW for smaller rooms. For 200HF, 201HF, 300HF, 301HF and BDHF200T models with room select, turn room select dial to the appropriate setting for a small (approx. 10'x10'/3m x3m), medium (approx. 12'x12'/3.8m x3.8m) or large room (approx. 12'x 16'/3.8m x5m) (B). 2. Turn thermostat control to HOT to activate heater/fan. Once de

Do not operate unless feet have been installed. Do not use heater in any orientation other than upright as shown in manual. To assemble: 1. Be sure heater is unplugged and OFF. 2. Turn heater upside down. 3.Remove center screw from end piece and position foot on base of heater (A). 4.Replace screw and fasten foot securely in place (B). 5.Repeat procedure to position foot on opposite side. 6.Set heater right side up. The Advanced Safety Technology™ (AST) system features unique technology built in

Plug into an AC outlet. For 100HF, 101HF models, choose HIGH for large rooms and LOW for smaller rooms. For 200HF, 201HF, 300HF, 301HF and BDHF200T models with room select, turn room select dial to the appropriate setting for a small (approx. 10'x10'/3m x3m), medium (approx. 12'x12'/3.8m x3.8m) or large room (approx. 12'x 16'/3.8m x5m) (B). 2. Turn thermostat control to HOT to activate heater/fan. Once desired room temperature is achieved, turn thermostat control toward FROST WATCH until fan cyc

or 4 hr. setting to select how long you’d like heater to stay on. The unit will shut off automatically once the selected time runs out. To operate heater continuously, turn timer knob to ON. Remember to shut unit Off when done. 6. To use as a fan without heat, move control knob to FAN ONLY and thermostat control toward HOT until fan begins to operate. No heating will occur in this mode. 7. To turn off, turn thermostat control to FROST WATCH and control knob to Off. Note: The power indicator ligh

Readjust your temperature or room settings. If unit fails to operate after 10 minutes, it may mean heater has internal damage and thermal fuse has been tripped so heater can no longer operate. 2. Motion-off detection feature: Cuts the power if unit falls over in any direction or is lifted (such as if you move it to another part of the room). 3. Tip-over switch: Cuts the power if unit is knocked over forward or backward. Both are controlled by the tipover switch on bottom of unit. Do not attempt

Note: If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 2 How to Use This appliance is intended for household use only. Important: For warranty verification, do not remove line cord sticker. The Advanced Safety Technology™ (AST) system features unique technology built into your heater that offers protection detailed in the "Special Features" section. Included in AST is a shock protection d

Portable electric heaters are designed for space heating as a supplementary heat source. They are not intended to be the main source of heat. Como usar Este aparato es solamente para uso domestico. El sistema de seguridad avanzado Advanced Safety Technology™ (AST) consiste de un dispositivo incorporado en el calentador que ofrece los medios de proteccion senalados en la seccion sobre dispositivos particulares de este manual. El sistema de seguridad AST es un dispositivo de la proteccion del choq

Este olor desaparece pronto. Este calentador ha sido disenado para ser utilizado sobre las superficies planas y seguras como los pisos, mesas, estantes, o escritorios donde las parrillas de circulacion de aire puedan permanecer libres de obstruccion. No utilice este aparato en las areas humedas ni mojadas como el bano o el cuarto de lavanderia ni donde almacene o utilice pintura u otros liquidos inflamables o volatiles. Precaucion: A fin de evitar una sobrecarga electrica, asegurese de que no ha