Repeat for the other wheel then repeat the process to assemble the other wheel support. • Place the heater on the floor upside down. It is quite normal to hear the oil moving inside the radiator. • Holding the bent end, insert the wheel clamp (7) between the last 2 heating fins. Place one assembled wheel support over this, & fit the bent end of the clamp through the hole in the support. • Slide the wheel support towards the bend in the wheel clamp, rotating the clamp as it moves until the free e

Oil-Filled Heaters Radiateurs a l’huile ? U.S.A./Canada 1-800-231-9786 PLEASE READ AND SAVE THIS USE AND CARE BOOK. NEED HELP? BESOIN D’AIDE? For service, repair or any questions regarding your appliance, call the Pour communiquer avec les services d’entretien ou de reparation, ou pour appropriate "800" number on the cover of this book. Do not return the adresser toute question relative au produit, composer le numero sans frais product to the place of purchase. Do not mail the product back to th

Plug into an AC outlet. For 100HF, 101HF models, choose HIGH for large rooms and LOW for smaller rooms. For 200HF, 201HF, 300HF, 301HF and BDHF200T models with room select, turn room select dial to the appropriate setting for a small (approx. 10'x10'/3m x3m), medium (approx. 12'x12'/3.8m x3.8m) or large room (approx. 12'x 16'/3.8m x5m) (B). 2. Turn thermostat control to HOT to activate heater/fan. Once desired room temperature is achieved, turn thermostat control toward FROST WATCH until fan cyc

Portable electric heaters are designed for space heating as a supplementary heat source. They are not intended to be the main source of heat. Como usar Este aparato es solamente para uso domestico. El sistema de seguridad avanzado Advanced Safety Technology™ (AST) consiste de un dispositivo incorporado en el calentador que ofrece los medios de proteccion senalados en la seccion sobre dispositivos particulares de este manual. El sistema de seguridad AST es un dispositivo de la proteccion del choq

Plug heater into a standard AC outlet. Caution: Be sure that no other appliances are plugged into same circuit with heater as a circuit overload could occur. 2. Press ON/OFF button to activate heater. The red lights by POWER and TEMP SETTING buttons will turn on (B). 3. Press POWER button to select appropriate setting: LO for a x 3m), MED for a medium (approx. 12’x12’/3.8m x 3.8m), room (approx. 12’x 16’/3.8m x 5m). 4. Press TEMP SETTING button to MAX. Once desired room temperature lower tempera

Readjust your temperature or room settings. If unit fails to operate after 10 minutes, it may mean heater has internal damage and thermal fuse has been tripped so heater can no longer operate. 2. Motion-off detection feature: Cuts the power if unit falls over in any direction or is lifted (such as if you move it to another part of the room). 3. Tip-over switch: Cuts the power if unit is knocked over forward or backward. Both are controlled by the tipover switch on bottom of unit. Do not attempt

2. Motion-off detection feature: Cuts the power if unit falls over in any direction or is lifted (such as if you move it to another part of the room). 3. Tip-over switch: Cuts the power if unit is knocked over forward or backward. Both are controlled by the tipover switch on bottom of unit. Do not attempt to defeat this safety feature. Care and Cleaning This appliance is permanently lubricated and will not require additional lubrication for the life of unit. It contains no user serviceable parts

It contains no user serviceable parts. Refer service to qualified service personnel. 1. Always turn the unit Off, unplug, disconnect the cord from the outlet, and allow the heater to cool completely before cleaning. To clean the exterior, use a soft dry cloth or one moistened with a mild detergent to wipe the outside surfaces. Do not use abrasives or harsh cleansers. Dry surfaces thoroughly before using the heater. Or, you can use a vacuum with a dusting brush attachment to clean away dust. 2. P

or 4 hr. setting to select how long you’d like heater to stay on. The unit will shut off automatically once the selected time runs out. To operate heater continuously, turn timer knob to ON. Remember to shut unit Off when done. 6. To use as a fan without heat, move control knob to FAN ONLY and thermostat control toward HOT until fan begins to operate. No heating will occur in this mode. 7. To turn off, turn thermostat control to FROST WATCH and control knob to Off. Note: The power indicator ligh

A circuit overload could occur. 1. Be sure dial is in OFF position before plugging in unit. Plug into an AC outlet. For 100HF, 101HF models, choose HIGH for large rooms and LOW for smaller rooms. For 200HF, 201HF, 300HF, 301HF and BDHF200T models with room select, turn room select dial to the appropriate setting for a small (approx. 10'x10'/3m x3m), medium (approx. 12'x12'/3.8m x3.8m) or large room (approx. 12'x 16'/3.8m x5m) (B). 2. Turn thermostat control to HOT to activate heater/fan. Once de