RDA-985 POWER CONSUMPTION: 10W RDA-985 OPTI COAX CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR Owner’s Manual CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. INSERT FULLY. APPLICABLE FOR USA, CA

We are confident that you will find satisfaction in the high quality sound and top performance, and that you will find pleasure in the functional beauty achieved through human-engineering concept. Before starting operation, please read this instruction manual thoroughly and acquaint yourself with the proper mode of using the unit and all its connections. We hope you will enjoy top-notch performance for many years to come. INSTALLATION Be sure to place the unit in a level and flat place where

Be sure to match L (left) and R (right) terminals of the components. To make correct connections, use cords with white plugs for left channel connections, and cords with red plugs for right channel connections. RD-835 AMPLIFIER —OUT- IN — p Û I В OR RELEIVER Й О W — IN -OUT— AUTOMATIC SHUTOFF SYSTEM When either end of tape is reached in play, record, fast-forward, or rewind mode, the motor and transport mechanism will automatically shut off, disengaging the present mode. Note, ho

1 DEUTSCH.......................................................... 5 FRANÇAIS......................................................... 8 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Write your SERIAL NUMBER here. The number is located near the name plate on the rear panel. SAFETY INSTRUCTIONS 1. Read Instructions — All the safety and operating instructions should be read b.efore the appliance is operated. 2. Retain Instructions — The safety a

only very briefly. 6. After adjusting recording level, press the PAUSE button again to put the unit into recording mode and to start the tape. 7. Carefully watch the meter indication during recording as well. PAUSE button may be used to temporarily halt recording. 8. Press STOP/EJECT button when recording is finished. When the end of the tape is reached, the recording mode will automatically disengage and tape stops. Playback 1. Set the Dolby NR button in depressed position when you play ba

A poor ventilation will cause undesirable effects to the unit. POWER SUPPLY CONNECTION For power the unit requires the normal house electrical current (AC). You may simply plug the unit into a wall outlet, or into your amplifier’s (or receiver’s) convenience AC outlet. CAUTION: Do not apply power without first making sure the proper connections are completed. If you live in U.K. and your unit comes with 2-core cord without a plug, be sure to read the exclusive caution for U.K. CONNECTION TO I

We are confident that you will find satisfaction in the high quality sound and top performance, and that you will find pleasure in the functional beauty achieved through human-engineering concept. Before starting operation, please read this instruction manual thoroughly and acquaint yourself with the proper mode of using the unit and all its connections. We hope you will enjoy top-notch performance for many years to come. INSTALLATION Be sure to place the unit in a level and flat place where

Please enjoy the sound Rotel have created for many years to come. To make sure you get the most of your equipment, please read this owner’s manual carefully before you attempt any connections. BEFORE CONNECTION 1. Place for Installation Ensure to place the unit in a f,at surface where it is free from humidity, vibration, high temperature and not exposed to direct sunlight. Also, be careful not to place the unit in a highly enclosed area without adequate ventilation around the unit. 2. Elect

Press all the way down to open the cassette door for removal or insertion of cassette tape. REC Button Used to put the deck in the recording mode. To record, simultaneously depress this button and the PLAY button. The REC indicator LED will light up to tell you that recording is taking place. PLAY Button Depress this button to play back prerecorded tape. Also, depress it simultaneously with the REC button when going into the recording mode. REW Button Depress this button to rapidly rewind

Please ensure to activate the button before pushing the PLAY button. When used with the MEMORY button only "0000" position to tape end will be repeated. The LED on display window light up when REPEAT button activated. (9) Counter Reset Depress the button to reset the tape counter to zero. The display will indicate "0000" for the numerical count. (10) REC MUTE Button When this button is pressed during recording, no signal is recorded while tape travel continues, creating a blank section on yo