Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Please enjoy the sound Rotel have created for many years to come. To make sure you get the most of your equipment, please read this owner’s manual carefully before you attempt any connections. BEFORE CONNECTION 1. Place for Installation Ensure to place the unit in a f,at surface where it is free from humidity, vibration, high temperature and not exposed to direct sunlight. Also, be careful not to place the unit in a highly enclosed area without adequate ventilation around the unit. 2. Electrical Requirements Your equipment has been designed to be powered by the local AC voltage. Check the setting of your unit by looking at the rear panel name plate. Never try to plug the unit into an outlet of higher voltage, as this, causes a serious fire hazard. Consult your dealer if in doubt. 3. Connecting the Power Cord Always handle the Power cord with care. Ensure to connect the cord to the household wall outlet. When plugging and unplugging make sure the power switch on the unit is turned off. 4. Do not Open the Cabinet There are no user-serviceable parts inside the cabinet of the unit. Do not attempt to open the cabinet or tamper with the internal components. If water or foreign object falls inside the unit by accidents, disconnect the power cord immediately and consult a qualified electrician of your dealer. 5. Cleaning Your Unit If your unit becomes dirty, wipe it gently with a soft, dry cloth. Never use solvents of any kind. CONNECTIONS 1. Connecting to Integrated Amplifiers, Preamplifiers or Receivers RD-955AX AMPLIFIER OR RECEIVER OUTPUT INPUT ¿Q) ®i j PHONO CO TUNER AUX ~ © © © © ■У ® <§> ® <§> TAPE @f “¡гт RIGHT I RIGHT 1 <§> <8f The illustration shows how the input and output terminals should be properly hooked up via the interconnect cords supplied with the unit to the Tape input and output terminals of your amplifier (integrated amplifier, preamplifier or receiver). Ensure that the Right (red) and the Left (white) channels are correctly matched. 2. Connecting for Remote control There is the DIN type socket marked REMOTE on the back of the unit. This is for connecting the unit to the Rotel tuner- preamplifiers or receivers which have wireless-remote control systems. When the unit is connected in such way, the control functions of the unit can be operated by remote control. SPECIAL FACILITIES 1. Automatic Shutoff System When either end of tape is reached in play, record, fast forward, or rewind mode, the motor and transport mechanism will automatically shut off, disengaging the present mode. NOTE: It is still necessary to turn off the unit electrically by pressing the Power button to off. 2. Automatic Tape Selection System The unit is equipped with the automatic tape selection factility which eliminates the need of manual tape selectors. When a tape is inserted, the setting for correct equalization and biasing in accordance to the type of the tape will be automatically done and indicators show what type of tape is inserted. CASSETTE TAPES 1. Use only high quality tapes for best possible result in sound recording. The good or better quality TDK, MAXELL, etc. well known tapes are recommended. 2. To prevent possible trouble with the transport mechanism, the use of C-120 or longer hour tapes is not recommended. 3. Handle tapes with care. Keep them away from heat, dust, or magnetic field (TV set etc.). 4. A loosened tape may cause trouble in playback or recording. Check the tape before loading it into the deck. If it is slack, insert a pencil or the into either of cassette’s hubs, and rotate it carefully until the slack is taken up. OUT 5. Each tape has safety tabs on its back edge prevent accidental recording. Each tab is provided for one side (2 tracks) of the tape. Once the tab is removed, recording cannot be done on the side the tab has been taken out. © © ©0© © RDTEL- STEREG CASSETTE TAPE DECK RD-955AX HJ PHONES □DC- L IIIIIIMIMIIIIIIIIIIIIIIIIIIIIIIIHIIIIIIIIIII S в S S fimiuiiMiiinmnmmimiimiHin^m ИОС REPT RESET 4=□□□ m REV PLAY ► Ff. •» STOP trx FTL OH/OFT — QDMt— */C [=□[==11==] В REC BALANCE а Ф © © The tab can be removed with a screwd river, etc. If you wish, however, to record on the side with no tab, place a piece of adhesive tape, etc. over the opening where the tab has been. SWITCHES AND CONTROLS (1) Power Button Press this button to turn on and off the unit. (2) Power Indicator Glows when power is turned on with the POWER button. (3) Eject Button Press this button to open the cassette door when loading or unloading the cassette tape. (4) Cassette Door Cassette tape is loaded into the cassette holder. Press the EJECT button to open the door. To close the cassette door, push it gently backward. (5) Multi-function display 1). Tape Counter- The 4 FL digit tape counter indicates the amount of tape travel. 2). Peak Level Indicator-Two bank FL displays show the recording or playback level for both left and right channels. 3). ...