R/O Feed Water Disposed Water Feed Valve for Flushing Disposed Water Controlling Valve Feed Valve for Feed Water LPS Filtered Water Check Fitting Stem Elbow HPS Neo-Sense filter RO Membrane filter Fine Post-Carbon filter Straight Fitting (1/4"+3/8") Booster Pump HPS_A Without any prior notice, all or parts of the product are subject to change for the purpose of improving the performance of the product. Efficiency rating means the percentage of the influent water to the system that is available t

If not observed, serious injury or property damage could occur. Warning If not observed, slight injury or property damage could occur. Caution Electricity Safety Safety Information Electricity Safety - For Information Do not use a damaged power cord or plug, and loose outlet. Electrical shock or fire may occur as a result. Do not unplug by pulling the cord or handle the plug with wet hands. Electrical shock or fire may occur as a result. Do not plug into an outlet or power strip that is being us

Please check if the Cooling/Heating mode indicator lamp is on (See P18). 1 When using Cold/Hot water turn on the Cold/Hot water function. When the cold water temperature indicator on the indication part is on, turn the cold/room water changeover faucet to the left and push the cuptouch lever and you may drink cold water (See P19). 2 Select cold water mode selection button to drink cold water and check the operation condition of the cooling mode indicator. When the hot water temperature lamp on t

22 23 INSTALLING METHOD Be cautious Installation place. When installing avoid bumpy areas, damp areas, and area in the reach of direct sunlight, dusty areas, water splashing areas. ¦ Installation place. Have 10Cm space between the wall and the product and install above the floor where it is solid and flat. ¦ After installation After installing use after throwing away room water more than twice. ¦ Cold water pipe Always connect to the cold water pipe. (When it is connected to hot water pipe the f

¦ After installation Use after throwing away the water in the water tank up to full level more than twice. Hot water caution ¦ Take care to avoid burns when extracting hot water. ¦ Draining hot water Pull the drainage door at the side downwards, and insert the drainage hose; this way, you can completely drain the hot water inside the system. . Note: take care not to burn yourself, since hot water suddenly starts to drain as soon as the hose is inserted. ¦ How to Use Please Keep In Mind Preparati

Unplug the power cord from the electrical outlet. 2. Close the main water supply valve. 3. Pull the product forwards by holding both sides of the product while pressing the button at the bottom left of the product, to separate the product from the installation plate. Unplug the product if it will not be used for a long time. Tips .... 4. Remove the drain plug at the back of the bidet by turning it counterclockwise by 90 degrees . and then pulling it forwards . so that the water in the hot water

This may result in corrosion to the metal parts or discoloration or scratches to the bidet body. . Use a soft cloth or sponge to clean the bidet. • This appliance is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not pla

‘Move’ button Use this button to use the move function. If you press the ‘Move’ button, as the nozzle is moved back and forth while you operate the rear cleansing/front cleansing function, you can clean a wider area. 7 8 ‘Nozzle Position’ button Use this button to control the nozzle position during the rear cleansing/front cleansing operation. You can move the nozzle in 5 levels using the ‘Nozzle Position’ button. ‘Wide’ button Use this button to control the water ejection range when using the c

Instant warm water system The water is instantly heated when using the rear and front cleaning functions so that you can immediately use water at your desired temperature. 2. Air+ function The water stream with air bubbles provides softer, stronger cleansing. 3. MESH Filter The MESH filter is a semi-permanent item. You can use the filter repeatedly by cleaning it. 4. Eco mode - Bidet eco mode: If the seat sensor does not detect someone sitting down or no panel or remote control button is pressed

It can not be used in overseas where the power rate is different. For the right operation of Coway Water Filtration System read this manual. Water Filtration System The Letter of Guarantee is enclosed here with this Coway product realizing "Quality is the best policy". P-07FR/RV/U/UV 2 3 4 5 02 The electric filter change indicator reminds user when to change the filter. If the system is in use for an extended period of time, the filter can be protected by the auto flushing feature. Coway invente