45-02181 26" LEAF/LAWNSWEEPER Safety Assembly Operating Maintenance Repair Parts CAUTION: Read Rules for Safe Operation and Instructions Carefully thefastest way to purchase parts PRINTED IN USA FORM NO. 40261 (4/24/07) SAFETY RULES Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using this equipment. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN AC

Follow maintenance and lubrication instructions as outlined in the maintenance section of this manual. Look for this symbol to point out important safety precautions. It means – Attention!! Become alert!! Your safety is involved. ENGLISH ASSEMBLY 3. (Figure 3) Position the brush assembly with the red brush retainer as shown and attach it to the brush shaft using two 1/4" x 1" hex bolts (G) and 1/4" nylock nuts (I). The brush retainer marked with red ink must be at the center of the sweeper. TOOL

Excessive heat can damage the brushes and hopper bag and could cause the bag and its contents to burn. MAINTENANCE CUSTOMER RESPONSIBILITIES 1. Check for loose fasteners before each use. 2. Clean the sweeper after each use. a. Clean sweeper housing with a soft brush or cloth. b. Clean debris from hopper bag with a brush or broom. c. Remove any material which has wrapped around brushes or ends of brush shaft. 3. Inspect for worn or damaged parts, such as brushes and wheels before each use. Replac

Place the tractor and sweeper on a flat level surface. 2. Set the sweeper height adjustment handle to about the middle of its adjustment range. 3. Attach the sweeper hitch brackets to the tractor hitch, arranging the 3/4" spacers so that the bottom of the sweeper bag is approximately level and 5" to 7" above the ground. See figure 22 for tractor hitches that are 10" to 13" above the ground. See figure 23 for tractor hitches that are 8" to 10" above the ground. IMPORTANT: For best performance, th

Finally, tighten the two bolts fastening the hitch brackets to the hitch tubes. 7. (Figure 4 or 5) Assemble the hitch pin (Y), two 3/4" spacers (U) and the 1/8" hair cotter pin (N) to the hitch brackets. 4 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK NUT (G) 3/4" SPACER (U) HITCH BRACKET HITCH BRACKET (STRAIGHT) 1/8" HAIR COTTER PIN (N) HITCH PIN (Y) CURVED HEAD BOLT (C) 5/16" HEX NUT (H) BOWED WASHER (L) 5/16" LOCK WASHER (K) HEIGHT ADJUSTMENT HANDLE GRIP 6 5 7 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK

No. Part No. Qty. Description Ref. No. Part No. Qty. Description 1 48646 1 Hitch Tube, R.H. 42 43661 4 Bolt, Hex 1/4-20 x 1" Lg. 2 48645 1 Hitch Tube, L.H. 43 25102 2 Dust Cover 3 24950 1 End Plate, R.H. 44 48471 2 Tube, Hopper Frame (Rear) 4 24951 1 End Plate, L.H. 45 48467 2 Tube, Upper Hopper Frame (Front) 5 24989 1 Wrapper 46 48728 2 Tube, Lower Hopper Frame (Front) 6 43175 2 Bolt, Hex 1/4-20 x 1/2" Lg. 47 48402 4 Plastic Plug 7 C-9M5732 6 Rivet, Pop 48 48396 1 Hopper Bag 8 23887 1 B

Modelo No. Modele No. 45-03371 30" LAWNSWEEPER BARREDORA DE CESPED DE 76 cm BALAYEUSE DE 76 cm CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de Repuesto ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. • Securit