Excessive heat can damage the brushes and hopper bag and could cause the bag and its contents to burn. MAINTENANCE CUSTOMER RESPONSIBILITIES 1. Check for loose fasteners before each use. 2. Clean the sweeper after each use. a. Clean sweeper housing with a soft brush or cloth. b. Clean debris from hopper bag with a brush or broom. c. Remove any material which has wrapped around brushes or ends of brush shaft. 3. Inspect for worn or damaged parts, such as brushes and wheels before each use. Replac

Assemble a door latch at each end of the cross brace using a 5/16" x 3/4" hex bolt, a nylon washer and a 5/16" Nylock hex nut. Place the nylon washer between the door latch and cross brace. Tighten so that latch is snug but will still rotate. See figure 13. 20. Place a side panel on top of the cart bed flange, inside the lip of the front panel. Fasten the side panel to the front panel using three 1/4" x 5/8" hex bolts and 1/4" Nylock hex nuts. Fasten the side panel to the cart bed flange using t

Modele no Modelo no 45-0456 44" Lawnsweeper BALAYEUSE A GAZON DE 44 PO. (112 CM) BARREDORA DE CESPED DE 44 PULGADAS (112 CM) FORM NO. 42016 (12/11/08) • Safety • Assembly • Operating • Maintenance • Repair Parts • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de repuesto • Securite • Assemblage • Utilisation • Entretien • Pieces 2 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise

Finally, tighten the two bolts fastening the hitch brackets to the hitch tubes. 7. (Figure 4 or 5) Assemble the hitch pin (Y), two 3/4" spacers (U) and the 1/8" hair cotter pin (N) to the hitch brackets. 4 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK NUT (G) 3/4" SPACER (U) HITCH BRACKET HITCH BRACKET (STRAIGHT) 1/8" HAIR COTTER PIN (N) HITCH PIN (Y) CURVED HEAD BOLT (C) 5/16" HEX NUT (H) BOWED WASHER (L) 5/16" LOCK WASHER (K) HEIGHT ADJUSTMENT HANDLE GRIP 6 5 7 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK

Modelo No. Modele No. 45-03371 30" LAWNSWEEPER BARREDORA DE CESPED DE 76 cm BALAYEUSE DE 76 cm CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de Repuesto ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. • Securit

Place the tractor and sweeper on a flat level surface. 2. Set the sweeper height adjustment handle to about the middle of its adjustment range. 3. Attach the sweeper hitch brackets to the tractor hitch, arranging the 3/4" spacers so that the bottom of the sweeper bag is approximately level and 5" to 7" above the ground. See figure 22 for tractor hitches that are 10" to 13" above the ground. See figure 23 for tractor hitches that are 8" to 10" above the ground. IMPORTANT: For best performance, th

45-02181 26" LEAF/LAWNSWEEPER Safety Assembly Operating Maintenance Repair Parts CAUTION: Read Rules for Safe Operation and Instructions Carefully thefastest way to purchase parts PRINTED IN USA FORM NO. 40261 (4/24/07) SAFETY RULES Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using this equipment. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN AC