. USER GUIDE GENERAL INFORMATION The 5828 and 5828V are wireless keypads that can be used to operate and get status from your security system. The 5828 and 5828V have the following features (voice annunciation features apply only to the 5828V): . Can be used to arm/disarm, and perform other system operations. . Can display and/or annunciate system status. . Can automatically display and/or annunciate a change in system status if AC powered (e.g., for an alarm, the keypad will announce the type

MESSAGE CENTER TO: PRESS: Record a message: # + 1 Stop recording before end of 20 seconds: 1 Playback a message: # + 3 Adjust message playback volume: # + 2 + 39 or 6. Mute keypad status announcements: # + 2 + 1 Restore keypad status announcements: # + 2 + 39 or 6. New message indication: If powered by battery, the Message LED will only blink when you activate the keypad by requesting status. If powered by AC, the Message LED will blink continuously. Once the message is played back, the LED will

It handles basic functionality and displays system status using 3 LEDs: Green for "Ready", Yellow for "Trouble", and Red for "Armed". The low cost and small footprint of the M1KPAS Arming Station makes it ideal for use as an alternative to the larger and more costly LCD keypads. It is particularly well suited for partitioned jobs such as an office, workshop, garage, etc., where full functionality is not necessarily required. The 12 button keypad is backlighted with blue LEDs and has quick arm ke

RCA 900N) dependiendo de su instalación. Attention! ATTENTION! ¡ATENCIÓN! € tf 2 fl 0000 — ✓ jj J ^16 V~ ✓ ✓ jj J J 2 M 5 FT/PC OR/OU/O %/ 'Tn 'T-' £r]J '4.9 IT N I O 69-2126EFS-01 69-2126EFS_A.indd 1 # 11/28/2007 1:16:43 PM I 1.5V R14 "C" 69-2126EFS-01 # Disposal & Recycling Batteries and waste electrical products should not be disposed of with household waste. Please recycle where these facilities exist. Check with your local authority or retailer for recycling advice.

Illuminated bell push buttons can be used when the chime is powered by a transformer (Honeywell RCA900N). Safety Before proceeding with the installation, please note the following safety warnings: • Always follow the manufacturer’s advice when using power tools and wear suitable protective equipment (e.g. safety goggles) when drilling holes, etc. • Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. • Chim

• Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. • Chime is for indoor use only. • Avoid mounting location which can expose chime to splashing or dripping liquid. • Use UL approved transformer for connection to mains. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like; danger of damage if battery is incorrectly replaced. Replace on

Taladre un agujero en la pared, en el lugar donde desea colgar la campanilla. Si la esta instalando en una pared de mamposteria, utilice el tarugo de pared incluido. 2. Inserte el tarugo de pared en el agujero (si es necesario), luego atornille dejando la cabeza sobresaliendo 6 mm de la superficie. 3. Cuelgue la campanilla de modo que la cabeza del tornillo quede asentada en el agujero de la parte posterior (F), luego presione suavemente hacia abajo para que la campanilla no pueda deslizarse fue

Note the + and - symbols molded into the back of the battery compartment. • If the chime sound becomes faint or distorted, you should replace the batteries. Use LR14(C) alkaline batteries only. • Check that the push battery has enough charge and is installed the right way. Note the + and - symbols molded into the back of the battery compartment. • Check that the bell push channel switch and the chime channel switch are in the same position. See Set Up. • Check that the distance between the bell

safety goggles) when drilling holes, etc. • Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like; danger of damage if battery is incorrectly replaced. Replace only with the same or equivalent type. 1. Checking Pack Contents • Chime • Bell push • CR2032 battery for bell push • 2 x screws

To save the tune selected, press and release programming button. Note: Pressing the program button for more than 15 sec will erase all memory. Follow step 3 to re-program. M27183 M27145 4. Install Back Cover Using Screws or Adhesive Pad Provided Note: Before final installation adjust distance and position between push and chime to optimize the chime within your environment. Dense walls and metal can reduce range. TOPTOPM27184 Wall Type Range Reduction Dry-lined partition wall 10–30% Single-layer