Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
19, 21) ® ZERO SET MEMORY* ^ Transmitter 0 REC START/STOP (p. 18, 20) [IT Power zoom (p. 22) ® DISPLAY (p. 15) Press this button to hide the screen indicators. * These buttons are not available during Easy Handycam operation. • Point the Remote Commander towards the remote sensor to operate your camcorder (p. 23). * To change the battery, see page 83. Searching quickly for a desired scene (Zero set memory) 1 During playback, press ZERO SET MEMORY ^ at a point you want to locate later on. The tape counter is reset to “0:00:00” and +0«- appears on the screen. If the tape counter is not displayed, press DISPLAY ®. 2 Press STOP 0 when you want to stop playback. 3 Press ^REW 0. The tape stops automatically when the tape counter reaches “0:00:00.” 4 Press PLAY 0. Playback starts from the point designated “0:00:00” on the tape counter. • There may be a discrepancy of several seconds between the time code and the tape counter. • Zero set memory will not function correctly if there is a blank section between recorded sections on the tape. To cancel the operation Press ZERO SET MEMORY ® again. Searching for a scene by date of recording (Date search) You can locate the point where the recording date changes. 1 Slide the POWER switch down repeatedly to turn on the PLAY/ EDIT lamp. 2 Press SEARCH M. ^ to select [DATE SEARCH]. 3 Press ^^(previous)/^w(next) ^ to select a recording date. Each time you press or ^W, your camcorder searches for the previous or next date from the current point on the tape.
Видеокамеры - DCR-HC17E (3.19 mb)
Видеокамеры - DCR-HC21E (3.19 mb)
Видеокамеры - DCR-HC22E (3.19 mb)