Оценок - , средний балл:
(
)
)
Производитель: HP
Размер: 88.08 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Supported IBM servers
Table 2 lists the EVA-compatible IBM AIX server models.
Table 2 IBM AIX supported servers
Server
Number
RS/6000 (PCI and PCI-X based servers only)
43P, 44P, F50, F80, H50, H70, H80, M80, S70,
S7A, S80, 170, 270
SP9076 model P-series
P610, P615, P620, P630*, P640, P650*, P655,
P660, P670, P680, P690*
*The SWIA1 and A7539A adapter driver does not support extended error handling.
Operating constraints
You can find information about operating constraints specific to the EVA and Command View EVA in
their respective release notes.
Storage System Scripting Utility for EVA
The HP StorageWorks Command View EVA software includes a Storage System Scripting Utility (SSSU).
You can download the HP StorageWorks Command View EVA with SSSU from the following HP web site:
ht p://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html
Avoiding problem situations
The following sections describe problems that may arise and their solutions.
Known problems
You can find information about problems specific to the EVA and Command View EVA in their respective
release notes.
Secure Path version
The EVA with VCS 3.028 requires the latest version of Secure Path for your operating system. The current
version of Secure Path for your operating system can be found at the following web site:
ht p://h18006.www1.hp.com/products/storageworks/enterprise/specifications.html
Codeload usage
When a maximally configured system is running at maximum load, codeload functionality is not effective
due to Secure Path timing constraints. The system may time-out before codeload is complete. Therefore,
you should perform VCS upgrades at an off-peak time.
Host considerations
This section contains information and important reminders about the host servers.
PCI hot swapping of FCAs not supported
Hot swapping is defined as replacing one FCA with an identical FCA in the same PCI slot while the
system is running. This function is not supported on pSeries systems that support hot swapping, because it
hangs the server. To replace an FCA, you must first shut down the server.
PCI hot addition of FCAs not supported
You cannot add a FCA to an empty PCI slot while the system is running because the hot addition of the
FCA fails. You must shut down the server in order to add an FCA.
IBM AIX connectivity 3.0H for the 3000/5000 Enterprise Virtual Array release notes
5
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks EVA3000 EMEA Bundles (88.08 kb)