Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE:
You must have VCS 3.028 instal ed before upgrading to VCS 4.00x or later. HP recommends that
you do a ful system backup before an HP service representative performs the migrating procedure.
Prerequisites
Multiple-path support
In a multipath environment, a Novell NetWare system with EVA storage requires the installation of
multipathing software on each host system to achieve high-availability, multipath capability.
For more information about multipath options, see the HP multipath website:
ht p://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
Single-path support
Novell NetWare servers require a single Fibre Channel adapter (FCA) to support single-path mode.
NOTE:
Do not use single-path mode in mission-critical environments.
VCS 3.028 to VCS 4.100 migration
The Active/Active failover feature in VCS 4.00x impacts host configurations. Contact your HP service
representative to configure your system and perform the migration procedure.
EVA storage system
These release notes contain the latest product information for operating the EVA3000/5000 on a
Novel NetWare system.
Compatibility/interoperability
This release provides full support for al previous EVA controller software used in an existing SAN
configuration.
Switch support
This release supports the Fibre Channel (FC) switches and firmware versions listed in the HP StorageWorks
SAN design reference guide, available for download on the HP support website:
ht p://www.hp.com/support/manuals
Under storage, click Storage Networking, and then select HP StorageWorks SAN under HP StorageWorks
SAN Solutions.
NOTE:
HP recommends that you not mix switch firmware versions in your storage area network (SAN). It is a
best practice to uniformly upgrade all switches in the SAN.
4
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks EVA3000 EMEA Bundles (88.15 kb)