Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Single-path support
Novell NetWare servers require a single Fibre Channel Adapter (FCA) to support single-path mode.
NOTE:
Single-path mode should not be used in mission-critical environments.
Compatibility/Interoperability
Switch support
This release supports the Fibre Channel switches and firmware versions listed in the HP StorageWorks
SAN design reference guide, which can be downloaded from the HP support website:
ht p://www.hp.com/support/manuals
Under storage, click Storage Networking, and then select HP StorageWorks SAN under HP StorageWorks
SAN Solutions.
NOTE:
HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best
practice to uniformly upgrade al switches in the SAN.
Server support
Al Novel Netware certified servers are supported.
HBA drivers
To download the latest HBA drivers for storage arrays, see the HP Storage website at:
ht p://h18006.www1.hp.com/storage/saninfrastructure.html
HP StorageWorks Storage System Scripting Utility
The latest version of the HP Storage System Scripting Utility (SSSU) is available on the software
downloads website:
ht p://www.hp.com/support/downloads
Under storage, click Storage software, and then select HP StorageWorks Command View EVA Software
under Storage Device Management Software. Select the version of the HP StorageWorks Command View
EVA Media Kit you want to download.
Important notes
SSSU
Changing comments on a disk enclosure
Use Command View EVA to change comments on a disk enclosure. If you try to change a disk enclosure
comment using SSSU, the following error message appears:
Error:
Invalid Operation
4
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks EVA3000 EMEA Bundles (90.03 kb)