Оценок - , средний балл:
(
)
)
Производитель: HP
Размер: 257.87 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Switch support
This release supports the Fibre Channel (FC) switches and firmware versions listed in the HP
StorageWorks SAN design reference guide which can be downloaded from the following web site:
ht p://h18000.www1.hp.com/products/storageworks/san/documentation.html
NOTE:
HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best
practice to uniformly upgrade al switches in the SAN.
Multiple-path support
Sun Solaris with EVA storage requires the installation of StorageWorks Secure Path on each host to
achieve high-availability, multiple-path capability.
Sun Solaris 10 requires the minimum version of Secure Path 3.0D SP1.
Single-path support
A Sun Solaris server requires a single Fibre Channel Adapter (FCA) to support single-path mode.
NOTE:
Single-path mode should not be used in mission-critical environments. To configure Sun Solaris in
single-path mode, you must use HSG80 Solution Software 8.7A for Sun Solaris connectivity.
Operating constraints
You can find operating constraints specific to the EVA and HP StorageWorks Command View EVA in
their respective release notes.
Storage System Scripting Utility for EVA
The Storage System Scripting Utility (SSSU) communicates directly with the Command View EVA. See
the HP StorageWorks Sun Solaris connectivity for the Enterprise Virtual Array installation and reference
guide for more information about SSSU.
Avoiding problem situations
The fol owing sections describe problems that may arise and their solutions.
Known problems
You can find information about problems specific to the EVA and Command View EVA in their respective
release notes.
Using config.sh to install an HSV110
When you use config.sh from the Fcraid manager to install an HSV110 on a system with an HSG80,
some paths to the storage may be undetected. Before installing Secure Path, run devfsadm to detect all
configured paths. Afterwards, run spconfig to correctly configure your system.
Sun Solaris connectivity 3.0J for the 3000/5000 Enterprise Virtual Array release notes
7
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks EVA3000 EMEA Bundles (257.87 kb)