Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации HP, модель HP EVA3000 Disk Array

Производитель: HP
Размер: 74.92 kb
Название файла:

Язык инструкции:enda

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста


К этому устройству также есть другие инструкции:

Фрагмент инструкции


Version: HP07
Description
HP StorageWorks Division announces the availability of updated firmware images for 15K RPM Fibre
Channel hard disk drives supported within the HP StorageWorks 3000/5000 and 4000/6000/8000
Enterprise Virtual Arrays.
Update recommendation Recommended
Product models
The table below lists the Fibre Channel hard disk drive models that are eligible for this upgrade.
Complete the upgrade of these disk drives at your earliest convenience.
HP disk drive part HP disk drive
Disk drive
Previous firmware Current firmware
number
model number
description
version
version
293567-001
BF03655B2B
36 GB 15K RPM
HP06
HP07
293567-002
BF07255B2C
72 GB 15K RPM
HP06
HP07
Enhancements
The following enhancements are included in this release:
• The command aging default of Mode 0x00 now equals 1.2 seconds.
• The PLOGI response to Queue position and LIP logout has been corrected.
• Corrections have been made to minimize Bypass, Abort IOEDC, and Timeout errors during
sequential writes.
• Performance enhancements have been made to address drive hang or assert conditions.
• New assert recovery improvements ensure that the drive provides a check condition and then
returns to normal function.
• Improvements have been made to target-generated LIP (reset) behavior.
• Enhancements have been made to drive code SMART, error recovery, and sense code techniques.
Prerequisites
To upgrade multiple disk drives online without the data migration process, you must be running:
• VCS 3.100 or later on EVA3000/5000
• XCS 6.000 or later on EVA4000/6000/8000
• HP Command View EVA 6.0.2 or later
NOTE:
You can upgrade disk drives using the data migration process if required or preferred. See HP
StorageWorks Enterprise Virtual Array upgrading disk drive firmware read me first for instructions.
Installation instructions
HP recommends that you use the bundled firmware file to upgrade all hard disk drives rather than
manually upgrade the firmware on an individual disk drive. To upgrade al hard disk drives:
1. If you have not already done so, download the HP StorageWorks EVA Hard Disk Drive Bundle file.
The file you download from the web is a zip file.
HP StorageWorks Enterprise Virtual Array 15K RPM Fibre Channel hard disk drive HP07 firmware update
3


...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP EVA4000 Starter Kit (74.92 kb)
Устройства обработки данных - HP EVA4000/6000/8000 Disk Arrays (74.92 kb)
Устройства обработки данных - HP StorageWorks EVA3000 EMEA Bundles (74.92 kb)
Устройства обработки данных - HP StorageWorks EVA4000 SAN Starter Kit (74.92 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории