Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP 4400 Dual Controller Enterprise Virtual Array w/Embedded Switch

Производитель: HP
Размер: 427.42 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции




NOTE:
It can take up to 10 minutes for the
component to display good status.
Adding the disk to a disk group
•
Observe the disk status indicators (Table 1 (page
After replacing the disk drive, add the disk to a disk
3)). The green indicator should be on or flashing.
group. The disk is typically added back into its original
disk group.
•
Verify the following using HP P6000 Command
1.
In the navigation pane, select Storage
View:
system→Hardware→Disk Enclosure→Bay.
◦ Navigate back to the component and verify
2.
In the content pane, select the Disk Drive tab.
the operational state. It should be
(Good).
3.
Click Group to initiate the process for adding the
disk to a disk group.
◦ Ensure that the disk drive is running the correct
firmware. Record the Model number and the
Operation Successful is displayed
Firmware version of the disk (Figure 13 (page
indicating the disk is now grouped and leveling
6)). Compare the firmware version with the
has been initiated. The storage system begins
supported disk drive firmware in the HP P6000
immediately using the disk.
Enterprise Virtual Array Disk Drive Firmware
NOTE:
If the Device Addition Policy is set to
Support document, which is available at the
automatic, the disk is automatically added to a
following website:
disk group. In this case, the Group option will
http://www.hp.com/support/manuals
not be available.
Click Disk Storage Systems under Storage,
and then select your product under
P6000/EVA Disk Arrays.
Returning the failed component
If the disk is running an unsupported version
of firmware, download the firmware from the
Follow the return instructions provided with the new
following website and install it using the
component.
instructions included with the firmware file. Do
not add the disk to a disk group if it is running
an unsupported firmware version.
Documentation feedback
http://www.hp.com/support/evadiskfirmware
HP is committed to providing documentation that meets
NOTE:
When downloading the
your needs. To help us improve the documentation,
firmware, use the disk drive model
send any errors, suggestions, or comments to
number to locate the correct firmware
Documentation Feedback (docsfeedback@hp.com).
file. If you have difficulty locating the
Include the document title and part number, version
firmware, contact your HP-authorized
number, or the URL when submitting your feedback.
service representative for assistance.
Figure 13 Verifying model number and firmware
version
Page 6

...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP 4400 Dual Controller Enterprise Virtual Array (427.42 kb)
Устройства обработки данных - HP EVA P6350 450GB 10K SAS Field Starter Kit (427.42 kb)
Устройства обработки данных - HP EVA P6350 450GB 10K SAS FIO Starter Kit (427.42 kb)
Устройства обработки данных - HP EVA P6350 900GB 10K SAS Field Starter Kit (427.42 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории