Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Interval: Select the interval to adjust. Red: Adjusts the red level. Green: Adjusts the green level. Blue: Adjusts the blue level. Reset: Resets the 10p White Balance to its default settings. . Gamma Adjusts the primary colour intensity. . Expert Pattern for LED 4500 - 5800 Series and PDP 550 - 570 Series : This function is not supported. Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the TV saves the calibration and the Expert Pattern screen disappears. Off: Turns the Expert Pattern function off. Pattern1: This test screen demonstrates the effect of your display settings on shades of grey and black. Pattern2: This test screen demonstrates the effect of your display settings on colours. N After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for the desired effect. N While the Expert Pattern is running, the TV does not output sound. N Only enabled in DTV, Component, and HDMI modes. . xvYCC for LED 4500 - 5800 Series and PDP 550 - 570 Series Series : This function is not supported. Setting xvYCC on increases picture detail and enlarges the colour space when you are watching movies input from an external device (e.g. BD/DVD player) connected to the TV’s HDMI or Component IN jacks. N Available only when you set the Picture Mode to Movie and the external input to HDMI or Component. N Some external devices may not support this function. . Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion. N This feature is not supported in 3D mode. N Only available in Standard mode. N When you change the Backlight for LED TV / Cell Light for PDP TV , Contrast, or Brightness, the TV sets Motion Lighting to Off. Picture Options Menu > Picture > Picture Options Using this function, you can configure additional picture settings to suit your preference. N When your TV is connected to a PC via an HDMI to DVI cable, you can only make changes to Colour Tone. . Colour Tone Select the colour temperature. N Warm1 or Warm2 will be deactivated when the Picture Mode is set to Dynamic. N You can adjust and store settings for each external device connected to an input on the TV. Select Source and then adjust the settings. . Digital Noise Filter If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. Auto Visualisation: When changing analogue channels, displays signal strength. N When the signal is weak, try all the options until the TV displays the best picture. N Only available for analogue channels. N When the bar is green, you are receiving the best possible signal. . MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. . HDMI Black Level Lets you adjust the screen depth by selecting a black level. N Available only in HDMI mode. . Film Mode Sets the TV so that it senses an...
Эта инструкция также подходит к моделям:Телевизоры - UA32EH4030W (2.17 mb)
Телевизоры - UA32EH4500W (2.17 mb)
Телевизоры - UA32EH4530W (2.17 mb)
Телевизоры - UA32EH5300W (2.17 mb)