Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment. 1 Press F/f to select the desired input source, then press ©. 2 Press F/f to select the desired option below, then press ©• -, CABLE, SAT, VCR, DVD/BD, GAME, AUDIO SYSTEM, CAM, PC Uses one of the preset labels to assign a name to connected equipment. Edit: Creates your own label. 1 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 2 Repeat the procedure in step 1 until the name is completed. 3 Select “OK”, then press ©. Skip Skips an input source that is not connected to any equipment when you press F/f to select the input source. Speaker Turns on/off the monitor’s internal speakers. TV Speaker The monitor speakers are turned on in order to listen to the TV’s sound through the monitor speakers. Audio System The monitor speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with “Control for HDMI” compatible equipment, you can turn the connected equipment on interlocked with the monitor. This setting must be made after connecting the equipment. Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. Stereo/Mono For a stereo broadcast. A/B/Mono For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. z • If you select other equipment connected to the unit, set “Dual Sound” to “Stereo”, “A” or “B.” IR Blaster Set-up See page 12 for the “IR Blaster Set-up” setting. (Continued) 35 GB Using MENU Functions HDMI Set-up This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side. Control for HDMI This sets whether to interlock the “Control for HDMI” compatible equipment and the unit. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. If the specific Sony equipment that is compatible with “Control for HDMI” is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the unit. Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible equipment turns off when you switch the unit to standby mode using the remote. Auto TV On When this is set to “On” and if the connected HDMI control compatible equipment is turned on, the unit automatically turns on, and the displays the HDMI input from the connected equipment. Device List Creates or updates the “HDMI Device List.” Up to 14 Update “Control for HDMI” compatible equipment can be connected, and up to 4 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds. HDMI Device List Displays the connected “Control for HDMI” compatible equipment. Product Information Displays your media receiver’s product information. Select “Monitor Product Information” to display your monitor’s product information. All Reset Resets all settings to the factory settings and then displays the “Auto Start-up” screen. z • Be sure not to turn the unit off during this period (it takes about 30 seconds) or press any buttons. • All settings, including digital favourite list, country, language, auto tuned channels, etc. will be reset. Monitor Set-up See the “Monitor Set-up” setting for monitor (page 46). Analogue Set-up Programme List Display Select “Off” to hide the list of analogue channels from the XMB™ (Xro ssMediaBar). Auto Tuning Tunes in all the available analogue channels. This option allows you to retune the unit after moving house, or to search for new channels that have been launched by broadcasters. 36 GB Programme Sorting Changes the order in which the analogue channels are stored on the unit. 1 Press F/f to select the channel you want to move to a new position, then press ©. 2 Press F/f to select the new position for your channel, then press ©. Manual Programme Before selecting “Label/AFT/Audio Filter/LNA/Skip”, press PROG +/- to select Preset the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 35). Programme/ Presets programme channels manually. System/Channel 1 Press F/f to select “Programme”, then press ©. 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select channel 00), then press *<~~l RETURN. 3 Press F/f to select “System”, then ...