Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
For help with these problems, try one or more of the following: . Try adjusting your typing technique to avoid accidental contact with the touch pad. You may be inadvertently brushing the touch pad with the heel of your hand as you type. Also, accidental light touches or taps on the touch pad may select an item or text on the screen, and potentially the item or text may be replaced by the next character you type. . Temporarily disable the touch pad, so that it does not respond to touch or button presses while you type. See “Disabling or enabling the touch pad” on page 82. . Disable the tapping feature. If you disable tapping only, you can still use the touch pad’s control buttons and move the pointer by sliding your finger on the touch pad. . Adjust the sensitivity of the touch pad, so that it is less responsive to accidental light taps and lighter finger pressure. NOTE Touch pad setting options vary by computer model. The touch pad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit and enter the phrase “Mouse pointer jumps around as you type” into the Search field. Scrolling with the touch pad There are two active regions on the touch pad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the touch pad. To scroll horizontally, run your finger along the bottom edge of the touch pad. This feature can be disabled or changed in the Mouse Properties dialog box. 82 82 82d Using external display devices Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession. The primary button usually corresponds to the left mouse button. The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button (“right-clicking”). Check your program’s documentation to determine whether it uses the right mouse button. Disabling or enabling the touch pad The touch pad is enabled by default. To enable/disable the touch pad, do one of the following: . Press the touch pad ON/OFF ( ) button. (Available on certain models.) . Press Fn + F9. For more information, see “Disabling or enabling the touch pad” on page 221. NOTE Alternately, you can disable only the tapping feature. If you disable tapping only, you can still use the touch pad’s control buttons and move the pointer by sliding your finger on the touch pad. To disable tapping only, use the Mouse Properties option in the Windows® Control Panel. When the touch pad is disabled, the (touch pad) primary and secondary buttons will also be disabled. However, the AccuPoint® and AccuPoint® button functions will remain enabled. Using external display devices Your computer comes with a b...
Эта инструкция также подходит к моделям:Ноутбуки - Tecra R850-Landis (4.35 mb)
Ноутбуки - Tecra R850-Landis-00303P (4.35 mb)
Ноутбуки - Tecra R850-Landis-08T03P (4.35 mb)
Ноутбуки - Tecra R850-S8510 (4.35 mb)