Оценок - 3, средний балл: 3.3
(
)
)
|
Фото и характеристики Sony KDL-40ZX1 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
11 GB 6: Operating optional equipment using the remote Connecting IR Blaster to the optional equipment Turn the power of the media receiver off before connecting the IR Blaster. Attach the IR Blaster near the remote sensor (IR) of the equipment. IR BLASTER IR Blaster Media receiver Optional equipment Performing the IR Blaster Set-up By setting “IR Blaster Set-up”, this remote can control most Sony Blu-ray Disc players, DVD players, DVD recorders, and AV receivers, or those of other manufacturers. Follow the steps below to programme the remote. 1 Press HOME on the remote. 2 Press G/g to select “Settings”. 3 Press F/f to select “Media Receiver Setup”, then press . 4 Press F/f to select “IR Blaster Set-up”, then press . The “IR Blaster Set-up” screen appears. IR Blaster Set-up Inputs Type Make Code AV1 AV2 HDMI 1 HDMI 2 HDMI 3 Component - Blu-ray Disc - Sony - 1 5 Press F/f to select “Inputs” to register the remote, then select the following items: Type: Connected equipment category. Make: Maker of the equipment. Code: IR code. The default IR code “1” appears when the maker of the equipment is selected. Test: Tests the power of the equipment currently being set. Make sure the power of the equipment turns on and off. If the equipment is not working, or some of the functions do not work Enter the correct code or its alternatives (if available) shown in the list in step 5. Note that the list may not include codes for all models of all brands. ~ • This function is not guaranteed to work with all devices. 12 GB Using optional equipment For details, refer to the operating instructions supplied with the connected equipment. Some buttons may not work depending on the connected equipment. 1 Press HDMI 1, HDMI 2, HDMI 3, AV1, AV2 or COMPONENT. 2 Press EXT. 3 While the EXT button lights up, press \/1 to turn the equipment on, then operate the equipment using the following buttons. REC WIRELESS MENU TOP MENU MENU F1 F2 BD/DVD REC PAUSE REC STOP TV COMPONENTMONITOR AV1 AV2 HDMI 2HDMI 1 HDMI HDMI 3 EXT DIGITAL/ ANALOGTHEATRE SYNC MENU AUDIO 1 4 7 2 5 8 0 3 6 9 PROG TV 1234576 z •The N button has a tactile dot. Use the tactile dot as a reference when operating other equipment. Item Description 1 BD/DVD • ./>: Goes to the operating beginning of the previous/ buttons next title/chapter/scene/ track. • / : Replays the scene/ briefly fast forwards the scene. • m/M: Fast reverses/fast forwards the disc when pressed during playback. • N: Plays a disc at normal speed. • X: Pauses the playback. • x: Stops the playback. 2 F/f/G/g/3 Selects / confirms an item. 3 HOME Opens the menu. Start- 4 DVD record buttons • z REC: Starts the recording. • X REC PAUSE: Pauses the recording. • x REC STOP: Stops the recording. 5 F1/F2 Selects a function when using a combination unit (e.g. a DVD/HDD). 6 BD/DVD MENU Displays the BD/DVD disc menu. 7 BD/DVD TOP MENU Displays the top menu of the BD/DVD disc. 13 GB Attaching the Stand for Media Receiver The media receiver can also be used vertically with the supplied stand. 1 Match the lug on the centre of the stand and the hole on the right side of the media receiver. Stand Removing the Terminal Cover for Monitor Hold the terminal cover as illustrated. Pull down 1, then remove at an angle 2. 14 GB Safety Information Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation s The TV set should be installed near an easily accessible mains socket. s Place the TV set on a stable, level surface. s Only qualified service personnel should carry out wall installations. s For safety reasons, it is strongly recommended that you use Sony accessories, including: – Wall-Mount Bracket SU-WL700 – Speaker System SS-TBL700/SS-WAL700 s Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8mm – 12mm Spacer (black) Screw M6 .16 (supplied with the Wall-Mount Bracket) Mounting Hook Rear of the monitor Transporting s Before transporting the TV set, disconnect all cables. s Two or more people are needed to transport a large TV set. s When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel and the frame around the screen. s When lifting or moving the TV set, hold it firmly from the bottom. s When transporting the TV set, do not subject it to jolts or excessive vibration. s When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Be sure to hold the bottom of the panel, not the front part. Ventilation s Never cover the v...