Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
If needed, follow the menus and procedures for setting up the features. IDIOMA/LANGUE To change menu language to ENGLISH, SPANISH or FRENCH. Procedure • Press VOL • to select English, Spanish or French. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE ENGLISH • MODE CABLE • AUTO PROGRAM • PRESS ACTION TO EXIT MODE To select TV (antenna) or CABLE mode depending on the signal source. Procedure • Press VOL .. to select TV or CABLE. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE ENGLISH • MODE CABLE • AUTO PROGRAM • PRESS ACTION TO EXIT AUTO PROGRAM To automatically program all available channels received through the RF input. Procedure • Press VOL .. to start Auto Programming. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE ENGLISH • MODE CABLE • AUTO PROGRAM • PRESS ACTION TO EXIT ENGLISH 5 • OPTIONAL EQUIPMENT CONNECTIONS Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the optional equipment (refer to page 9 for programming information). VCR Connection VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected. VCR Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the same time. If both are connected, signal interference will result. Use either the S-VIDEO or the Video signal only. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. CONNECTION ON BACK OF TV CABLE BOX Incoming Cable ANT IN ANT OUT 15 PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 L R TO AUDIO AMP ANT CABLES NOT SUPPLIED Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. ENGLISH TERMINALS ON BACK OF TELEVISION PLAY STOP R E W FF ANT IN ANT OUT VIDEO OUT AUDIO OUT L R Incoming Cable PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 L R TO AUDIO AMP ANT VIDEO 3 L AUDIO IN R HPJ Jack used for 1/8" headphone plug FRONT A/V JACKS CABLES NOT INCLUDED Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. PR PB Y/VIDEO R-AUDIO-L R-AUDIO-...
Эта инструкция также подходит к моделям:Телевизоры - CT32E14 (5.04 mb)
Телевизоры - CTG2134 (5.04 mb)
Телевизоры - CTG2174 (5.04 mb)
Телевизоры - CTG2174L (5.04 mb)