Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The on-screen label will display Component or Video 1 depending on which source is connected. VCR Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the same time. If both are connected, signal interference will result. Use either the S-VIDEO or the Video signal only. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. CONNECTION ON BACK OF TV CABLE BOX Incoming Cable ANT IN ANT OUT 15 PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 L R TO AUDIO AMP ANT CABLES NOT SUPPLIED Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. ENGLISH TERMINALS ON BACK OF TELEVISION PLAY STOP R E W FF ANT IN ANT OUT VIDEO OUT AUDIO OUT L R Incoming Cable PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 L R TO AUDIO AMP ANT VIDEO 3 L AUDIO IN R HPJ Jack used for 1/8" headphone plug FRONT A/V JACKS CABLES NOT INCLUDED Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 L R TO AUDIO AMPDIGITAL TV OUTPUT Y PB PR S-VIDEOVIDEOR-AUDIO-L NTSC OUTPUT R-AUDIO-L CABLES NOT SUPPLIED TERMINALS ON BACK OF DTV-STB OR DVD PLAYER COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV Notes: • There are three video jacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. • Select DTV-STB to 480i output mode. TV set can receive 480i signal only. Picture distortion will result if any other type of format is selected (i.e. 480p, 720p or 1080i). Amplifier Connection (TO AUDIO AMP) To listen the audio through a separate stereo system, connect an external audio amplifier to TO AUDIO AMP outputs on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. TERMINALS ON BACK OF TELEVISION TO AUDIO External Amplifier AMP L R PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 CABLES NOT INCLUDED Audio Adjustments • Select TV SPEAKERS ON from AUDIO menu. • Set amplifier volume to minimum. • Adjust television volume to desired level. • Adjust amplifier volume to match the television. • Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. • Volume, mute, bass, treble and balance are now controlled through the television. Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier. Front Control Panel Use the front panel of the television to use the TV withoutremote or to use the A...
Эта инструкция также подходит к моделям:Телевизоры - CTG2134 (5.04 mb)
Телевизоры - CTG3354 (5.04 mb)
Телевизоры - CTG2174 (5.04 mb)
Телевизоры - CTG2174L (5.04 mb)