3. Dress garment on buck. 4. Simultaneously push and hold both CLOSE pushbuttons (Items 1 and 6, Figure 2) until head closes and pressing pressure is applied. Release both pushbuttons. NOTE: If either pushbutton is released BEFORE pressing pressure is applied, head will return to a fully OPEN position. 5. Once garment is sufficiently pressed, press OPEN pushbutton (Item 5, Figure 2) to open press. 6. Hang or fold pressed article as soon as possible to preserve finish. Presses With Timers ONLY 1.

7.Check that the collar block is positioned in the head cutout per Figure 6. If collar block is not properly aligned, check press level. If press is level, shim buck, adjust collar block or discharge tube as necessary. 1/8 in. (3 mm) 1/8 in. (3 mm) 1/8 in. (3 mm) CAB240N Figure 6 8.Press the head release button. Heads should open and buck should return to the dressing station. 9.Simultaneously press and release both buck in buttons. As buck travels into cabinet, press red safety bar which is nea

With respect to non-durable parts normally requiring replacement in less than two (2) years due to normal wear and tear, and with respect to all new repair or replacement parts for Cissell equipment for which the two (2) year warranty period has expired, or for all new repair or replacement parts for equipment other than Cissell equipment, the warranty period is limited to ninety (90) days from date of sale. The warranty period on each new replacement part furnished by Cissell in fulfillment of

Store this manual in a file or binder and keep for future reference. WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury, or loss of life. -Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. -WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliances. • Do not touch any electrical switch; do not use any phone in your b

4 Table of Contents ................................................................................................................ 5 Warnings, Cautionary Notes and Symbols........................................................................ 6-7 Unpacking and General Insulation ....................................................................................... 8 Disassembling Top of Dryer ............................................................................................... 9 Ga

Overloading it will result in long drying times and damp spotson some clothes. IMPORTANT Maximum operating efficiency is dependent upon proper aircurculation. The lint screen must be kept cleaned daily toinsure proper air circulation throughout the dryer. IMPORTANT Provide adequate clearance for air opening into the combustionchamber. Unpacking/General Installation (All Dryers) UNPACKING GENERAL INSTALLATION (ALL DRYERS) All Cissell dryers are packed in a protective (heavy-duty) plastic bag. Upo

(49.9 kg) dryweight Basket Motor.............................................1 HP Fan Motor..................................................1 1/2 HP Basket RPM Reversing ................................................28 (3.2 reversals per minute) Non-Reversing ........................................34 Exhaust Duct .............................................12” diameter (30.48 cm) Maximum Air Displacement Steam-Gas ...............................................2160 CFM (61.16 M./Min.) Elect

3/4” (1.91 cm) 6-Coil .................................................. 3/4” (1.91 cm) Steam Return Line 4-Coil .................................................. 3/4” (1.91 cm) 6-Coil .................................................. 3/4” (1.91 cm) Drying Time .......................................... 110 lbs. (49.9 kg) dry weight (Approx. - testing in lab.) ...................... Indian Head cloth 4-Coil .................................................... High Pressure (100 PSIG Max.) 70%

70—Latest Edition. See wiring diagram furnished with dryer. Your Cissell dryer is completely wired at the factory and it is only necessary for the electrician to connect the power leads to the wire connectors within the service connection box on the rear of the dryer. Do not change wiring without consulting the factory, as you may void the factory warranty. DO NOT CONNECT THE DRYER TO ANY VOLTAGE OR CURRENT OTHER THAN THAT SPECIFIED ON THE DRYER RATING PLATE. (Wiring diagram is located on rear w

NATURAL GAS ONLY Check the gas pressure inlet supply to the dryer, 11 inches WC Pressure maximum. Check the manifold pressure, 3.5 inches WC Pressure inside the dryer. CAUTION Low gas pressure and intermittent gas will cause gas ignition problems and inadequate drying of the clothes load. Page 21 Steam Piping Installation INSTALLATION INSTRUCTIONS PIPING RECOMMENDATIONS 1. Set and anchor dryer in position. Machine should be level to assure proper steam circulation. 2. To prevent condensate drain