Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference. Framing Nailer Note: This framing nailer is shipped with the BLACK single cycle mode trigger installed. Always know the operational mode of the nailer before using. Failure to know the operational mode could result in death or serious personal injury. Operational Modes This stick framing naile

TRIGGER ONLY MODE (WITH TRIGGER LOCK) The tool is a single-actuator device. This mode requires that, with the trigger lock not positioned in the safe mode, only a pull of the trigger will fire a fastener. After verifying there are no fasteners in the tool, safety check the operation of the activated trigger lock to prevent the tool from firing a fastener before storage. Always disconnect from compressed air when not in use. LOADING/UNLOADING THE TOOL 1. Set the pin length adjustment switch to th

Estos articulos solo estaran cubiertos bajo esta garantia por noventa (90) dias a partir de la fecha de compra articulos subrayados solo estan garantizados por defectos de material o fabricacion. F. Defectos esteticos que no interfieran con la funcion del producto 7. RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como productos o componentes que esten defectuosos, se hayan danado o hayan dejado de durante el periodo de validez de la garantia 8. RESPONSABILIDADES DEL COMP

Si dichos instrumentos de seguridad son desconectados, la garantia quedaria cancelada. D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto. E. Articulos o servicios normalmente requeridos para el mantenimiento del producto, tales como: anillos en O, resortes, amortiguadores, defensas, hojas de impulsor, fusibles, baterias, empaques, almohadillas o sellos, boquillas de fluido, agujas, boquillas para rociar arena, lubricantes, mangueras de material, elementos f

. The safe use of the tool. . Ensuring that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. . Assuring that the tool is kept in safe working order as described in this manual. EMPLOYER’S RESPONSIBILITY: . Selecting an appropriate tool actuation system, taki

3. Make sure the trigger and work contact element (WCE) move freely up and down without sticking or binding. Movement 4. Reconnect air supply to the nailer. 5. Depress the Work Contact Element (WCE) against the work surface without pulling the trigger. The nailer MUST NOT OPERATE. Do not use the tool if it operates without pulling the trigger. Personal injury may result. 6. Remove the nailer from the work surface. The Work Contact Element (WCE) must return to its original down position. The nail

DURATION: From the date of purchase by the original purchaser as follows: One (1) Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld product. 4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any nailer, stapler, air tool, spray gun, inflator or air accessory supplied

© 2007 Nailer Components And Specifications HD219000 HD289000 • REQUIRES (SCFM with 16 nails 4.1 4.1 per minute @ 90 psi) • AIR INLET 1/4 inch NPT 1/4inch NPT • NAIL LENGTH 2 inch 2 inch RANGE to 31.2 inch to 31.2 inch • NAIL SHANK 0.113 inch to 0.113 inch to RANGE 0.131 inch 0.131 inch • MAGAZINE CAPACITY 60-75 75-105 • WEIGHT 8 lbs. 5 oz. 8 lbs. 15 oz. • LENGTH 19.5 inch 21.75 inch • HEIGHT 15 inch 15 inch • MAX PRESSURE 120 psi 120 psi • PRESSURE RANGE 70 - 120 psi 70 - 120 psi HD349000 4.1 1

Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in death or serious personal injury. Do not drive a fastener on top of other fasteners. The fastener could glance and cause death or a serious puncture wound. Do not operate or allow anyone else to operate t

Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, may cause damage to equipment. NOTE: Information that requires special attention. General Safety Information CALIFORNIA PROPOSITION 65 This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. You can creat