RANGE CAT CAT + _ hc7f.eps Diode Test (G) RANGE CAT + _ _ Forward Bias Single Beep RANGE CAT CAT + Reverse Bias _ RANGE CAT CAT + Shorted Open and Good Diode Good Diode Bad Diode _ RANGE CAT CAT + Bad Diode hc5f.eps Continuity Test ( R ) RANGE CAT CAT + _ RANGE CAT CAT + _ hc8f.eps If continuity exists (resistance < 210 W for Models 21/75 and <270 W for Models 23/77), the beeper sounds continuously. The meter beeps twice if it is in Touch Holda mode. Current(?A) W Warning To avoid injury, do not

EMC Regulations EN 61326-1 1997. Certifications/Listings Function Range Accuracy . 3.200 V, 32.00 V, 320.0 V 600 V (21/75), 1000 V (23/77) ±(0.3%+1) ±(0.4%+1) m. 320.0 mV ±(0.3%+1) K (45 to 500 Hz, 3.2 V range. Other ranges 45 to 1 kHz) 3.200 V, 32.00 V, 320.0 V 600 V (21/75), 1000 V (23/77) ±(2%+2) ±(2%+2) . 21/75: 23/77: 320.0 W 3200 W, 32.00 kW, 320.0 kW 3.200 MW 32.00 MW 320.0 W 3200 W, 32.00 kW, 320.0 kW 3.200 MW 32.00 MW ±(0.5%+2) ±(0.5%+1) ±(0.5%+1) ±(2%+1) ±(0.5%+3) ±(0.5%+1) ±(0.5%+1) ±

• Be sure the test leads and switch are in the correct position for the desired measurement. • Never measure resistance in a circuit when power is applied. • Never touch the probes to a voltage source when the test leads are plugged into the 10 A or 300 mA input jack. • Never apply more than the rated voltage between any input jack and earth ground. • Be careful when working with voltages above 60 V dc or 30 V ac rms. Such voltages pose a shock hazard. • Keep your fingers behind the finger guard

AC conversions are ac-coupled, average responding, and calibrated to the RMS value of a sine wave input. Accuracy specifications are given as: ±([% of reading] + [number of least significant digits]) Maximum Voltage Between Rated voltage any Terminal and Earth Ground Display Digital: 3,200 counts, updates 2.5/sec Analog: 31 segments, updates 25/sec Response Time of Digital V ac < 2 s Display V dc < 1 s W < 1s to 320 kW, < 2s to 3.2 MW, < 10 s to 32 MW Operating Temperature 0°C to 50°C Storage Te