Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
RANGE CAT CAT + _ hc7f.eps Diode Test (G) RANGE CAT + _ _ Forward Bias Single Beep RANGE CAT CAT + Reverse Bias _ RANGE CAT CAT + Shorted Open and Good Diode Good Diode Bad Diode _ RANGE CAT CAT + Bad Diode hc5f.eps Continuity Test ( R ) RANGE CAT CAT + _ RANGE CAT CAT + _ hc8f.eps If continuity exists (resistance < 210 W for Models 21/75 and <270 W for Models 23/77), the beeper sounds continuously. The meter beeps twice if it is in Touch Holda mode. Current(?A) W Warning To avoid injury, do not attempt a current measurement if the open circuit voltage exceeds the rated voltage of the meter. To avoid blowing an input fuse, use the 10 A jack until you are sure that the current is less than 300 mA. Turn off power to the circuit. Break the circuit. (For circuits of more than 10 amps, use a current clamp.) Put the meter in series with the circuit as shown and turn power on. 1 2 RANGE _ CAT CAT + + 4 3 A hc10f.eps Probe Holder hc14f.eps Maintenance W Warning To avoid electric shock, remove the test leads before opening the case, and close the case before using the meter. To prevent fire and possible arc- flash, use fuses with ratings shown on the back of the meter. Caution To avoid contamination or static damage, do not touch the circuit board without proper static protection. Internal Fuse Test RANGE 10 A300 mA W<.5W4-8 OKOK OKOK hc9f.eps Battery Replacement Note Before opening the case, make sure the test leads are removed and the rotary switch is turned to OFF. hc12f.eps Fuse Replacement F2 F2 F1 F1 23/77 21/75 hc13f.eps Cleaning To clean the meter, use a damp cloth and mild detergent; do not use abrasives or solvents on the meter. Service and Parts To contact Fluke, call one of the following telephone numbers: USA and Canada: 1-888-99-FLUKE (1-888-993-5853) Europe: +31 402-678-200 Japan: +81-3-3434-0181 Singapore: +65-*-276-6196 Anywhere in the world: +1-425-356-5500 Or, visit Fluke’s Web site at Item Description Fluke PN Quan. BT1 Battery, 9 V, NEDA 1604/IEC 6F22, or NEDA 1604A/IEC 6LR61 F1* Models 21/75: Fuse, F630 mA, 250 V, Min Interrupt Rating 1500 A or IEC 127-1 F2* Fuse, F11 A, 1000 VAC/DC, Min Interrupt Rating 17 kA F1* Models 23/77: Fuse, F44/100 A, 1000 VAC/DC, Min Interrupt Rating 10 kA F2* Fuse, F11 A, 1000 VAC/DC, Min Interrupt Rating 17 kA 696534 614487 740670 943118 943121 943118 1 1 1 1 1 * For safety, use exact replacement Specifications Accuracy is specified for a period of one year after calibration, at 18°C to 28°C (64°F to 82°F) with relative humidity to 90%. AC conversions are ac-coupled, average responding, and calibrated to the RMS value of a sine wave input. Accuracy specifications are given as: ±([% of reading] + [number of least significant digits]) Maximum Voltage Between Rated voltage any Terminal and Earth Ground Display Digital: 3,200 counts, updates 2.5/sec Analog: 31 segments, updates 25/sec Response Time of Digital V ac < 2 s Display V dc < 1 s W < 1s to 320 kW, < 2s to 3.2 MW, < 10 s to 32 MW Opera...
Эта инструкция также подходит к моделям:Соковыжималки - 21 (448.69 kb)
Соковыжималки - 75 (448.69 kb)
Соковыжималки - 77 (448.69 kb)