Before first use Thoroughly clean the par ts that come into contact with food before you use the appliance for the first time (see chapter ‘Cleaning and storage’). using the appliance Juicer 1 2 3 4 5 6 7 preparing the juicer for use Make sure all detachable parts are clean (see chapter ‘Cleaning and storage’). Unwind the mains cord from the base of the motor unit (Fig. 3). Assemble the integrated pulp container onto motor unit (Fig. 4). Assemble the juice collector onto the integrated pulp cont

21 BaHasa MElayu 29 ....... 37 Ti.ng Vi.T 43 56 63 HR187 1, HR1869 EnglisH introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at This juicer has been designed to maximise the juice output while minimising the cleaning effor t. It has been specifically developed to enable you to process a broad variety of ingredients and a wide range of recipes with confidence. general description (Fig. 1) 1 Pusher 2

2). Place the juice collector in the appliance (1).To place the pulp container, tilt it forwards slightly (2). Insert the top end of the pulp container first and then push home the bottom end (Fig. 3). To empty the pulp container while you are juicing, switch off the appliance and carefully remove the pulp container. Note: Reassemble the empty pulp container before you continue juicing. 4 Put the filter in the juice collector (1). Hold the lid over the filter and lower it into position (2) (Fig.

8ENGLISHTip: Use the black two-part filter for clear juice. If you prefer cloudy juice with more fibres in it, use the grey two-part filter. 5 Attach the spout