Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE:
For information about errors encountered during the installation, removal, reinstallation,
and verification of the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver, see the error log files
at /var/adm/sw.
Known Problems and Workarounds
Following is the known problem and workaround in the HP PCI Tachyon TL/TS/XL2 Fibre
Channel driver:
•
Problem: The A6795A Fibre Channel adapter settles in the Public Loop topology as opposed
to the Point to Point Fabric topology when connected to a 4Gb Fibre Channel Brocade Switch
port.
Symptom: The /opt/fcms/bin/fcmsutil /dev/
in the output instead of the
expected PTTOPT_FABRIC output, against the Topology field.The /dev/
file that corresponds to the A6795A Fibre Channel adapter that is connected to the 4Gb
Brocade Switch port.
Workaround: Configure the Brocade switch port that is connected to the A6795A Fibre
Channel adapter, as G port. Use the telnet command to connect to the switch. To enable the
G port settings, enter the following command at the switch prompt:
switch> portcfggport
The following message is displayed at the switch prompt:
Committing configuration...done.
For more information about the portcfggport command, use the help command:
switch> help portcfggport
For detailed information about the portcfggport command, see the manpage and Release
Notes for the Brocade switch present at:
http://www.brocade.com/index.jsp
To turn off the G port settings, enter the following command at the switch prompt:
switch> portcfggport
The following message is displayed at the switch prompt:
Committing configuration...done.
Related Information
For more information about the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver, see the
following documentation available at:
http://docs.hp.com/en/5900-0171/5900-0171.pdf
Support Guide
This document provides a product overview, and discusses
additional features and regulatory information. It also describes
how to install, configure, troubleshoot, and maintain the driver.
Installation Guide
This document describes how to install software and hardware for
specific HBAs.
Support Matrix
This document discusses support matrix for Fibre Channel adapters,
supported hardware platforms, operating systems, driver bundle
versions, and minimum processor dependent code (PDC) or
firmware requirements.
White Paper
The white papers suggest and describe ways to increase the
performance of Fibre Channel adapters.
Known Problems and Workarounds
9
...