Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This document provides information about the B.11.11.15 release of the FibrChanl-01 (fcd) Fibre
Channel Mass Storage Driver for HP-UX 11i v1.
FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v1
Overview
This release of the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v1
(version B.11.11.15) fixes several defects.
New and Changed Features in This Release
New Features
The following features are new with the B.11.11.15 version of the FibrChanl-01 (fcd) Fibre Channel
Mass Storage Driver for HP-UX 11i v1:
•
There are no new features with this version of the driver.
Defects Fixed in This Version
The following defect is fixed in the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for
HP-UX 11i v1 June 2008 release. To view the entire details of each defect fix, refer to the HP IT
Resource Center at: http://forums1.itrc.hp.com/service/forums/home.do
Table 1 HP-UX 11i v1 June 2008 Fixes
Defect ID
Description
QXCR1000810915
SNIA HBA Library API HBA_GetFcpTargetMapping() is taking longer time to complete
(getting FCP target mapping details), if the host has LUN's in "NO_HW" state. Fix has been
provided to ignore the LUN's in NO_HW state and no further processing will be done for
those LUN's.
Known Problems and Limitations
This section provides a list of known problems and limitations as known to HP at time of
publication. If workarounds are available, they are included.
•
OnlineDiag Error when Using info Option
A problem may occur on Fibre Channel ports controlled by the fcd driver. The September
2005 version of the OnlineDiag bundle contains a version of STM that will show errors when
using the info option, when run against HBAs that are claimed by the fcd driver. STM fails
with messages such as Tool is exiting due to receipt of an unexpected
signal (11).
Corrective Action: Run /opt/fcms/bin/fcmsutil
•
Using ioscan with krm Not Running
When ioscan is run with the —fn or —Fn option, and the kernel resource monitor (krm) is
not running, there could be stale krm device files in the system, which would correspond
to different devices, including fcd, in ioscan output. This issue has no impact on the
functionality of the Fibre Channel port; however, ioscan output may be confusing. This
issue can impact any card accessible with ioscan, and is not specific to the cards supported
by the fcd driver.
Corrective Action:The ioscan output can be returned to normal by either deleting the stale
krm device files, or by starting krm, which will recreate the device files.
FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v1 Overview
3
...
Сетевое оборудование - HP-UX 11i v1 I/O Cards (238.68 kb)