Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP 10 Gigabit Ethernet Cards

Производитель: HP
Размер: 165.84 kb
Название файла:
Язык инструкции:enda
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


This document provides information about the July 2010 release of the 10GigEthr-01 bundle for
HP-UX 11i v3.
1 10GigEthr-01 Overview
The 10GigEthr-01 bundle contains the icxgbe version B.11.31.1007 driver, which supports the
AD386A PCIe 10 Gigabit Ethernet Card.
2 New and Changed Features in This Release
2.1 New Features
There are no new features included in 10GigEthr-01 at the time of this publication.
2.2 Changed Features
There are no changed features included in 10GigEthr-01 at the time of this publication.
3 Problems Fixed in This Version
Table 1 HP-UX 11i v3 July 2010 Fixes — 10GigEthr-01 B.11.31.1007
SR Number
Description
QXCR1001041440
AD386A PCIe 10GbE adapter icxgbe link down after system reboot.
Problems Fixed in Recent Versions
There were no defects or fixes included in 10GigEthr-01 B.11.31.1003.
There were no defects or fixes included in 10GigEthr-01 B.11.31.0909.
4 Known Problems and Limitations
No known problems were identified for this version of 10GigEthr-01 at the time of this publication.
5 Compatibility and Installation Requirements
This section describes the compatibility information and installation requirements for this release.

For specific installation instructions, see the installation procedure or overview document
for your card.

For detailed information on supported server platforms, operating systems, and firmware
level requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/hpux-iocards-docs
Click the link for your HP-UX version.

Installation guides are listed alphabetically in the “Setup and install — general” section.

Support Matrix documents are listed alphabetically in the “General reference” section.
5.1 Operating System and Version Compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware Requirements
This version of 10GigEthr-01 runs on HP Integrity servers with the HP-UX 11i v3 (B.11.31)
operating system.
1 10GigEthr-01 Overview
3


...

Эта инструкция также подходит к моделям:
Сетевое оборудование - HP-UX 11i v3 I/O Cards (165.84 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории