|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This document provides information about the March 2011 release of the 10GigEthr-01 bundle
for HP-UX 11i v3.
1 10GigEthr-01 overview
The 10GigEthr-01 bundle in HP-UX Application Release 1103 contains the icxgbe version
B.11.31.1012 driver, which supports the AD386A PCIe 10 Gigabit Ethernet Card.
2 New and changed features in this release
2.1 New features
There are no new features included in 10GigEthr-01 at the time of this publication.
2.2 Changed features
There are no changed features included in 10GigEthr-01 at the time of this publication.
3 Problems fixed in this version
Table 1 HP-UX 11i v3 December 2010 fixes — 10GigEthr-01 B.11.31.1012
SR number
Description
QXCR1000886474
Panic in icxgbe_ilan_hdm_send() in servers with more than 128 CPUs.
QXCR1000968047
Nameserver fcd queries fail due to malloc_map_failure in vPars environment.
QXCR1001022813
All IOVR resources are exhausted on servers with vPars enabled.
Problems fixed in recent versions
Table 2 HP-UX 11i v3 July 2010 Fixes — 10GigEthr-01 B.11.31.1007
SR Number
Description
QXCR1001041440
AD386A PCIe 10GbE adapter icxgbe link down after system reboot.
There were no defects or fixes included in 10GigEthr-01 B.11.31.1003.
There were no defects or fixes included in 10GigEthr-01 B.11.31.0909.
4 Known problems and limitations
•
Duplicate multicast/broadcast packets on the guest if HPVM AVIO is use.
Severity: Medium.
This problem will be fixed in a future release of the 10GigEthr-01 bundle.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
•
For specific installation instructions, see the installation procedure or overview document for
your card.
•
For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/10-gigabit-ethernet-docs
1 10GigEthr-01 overview
3
...Эта инструкция также подходит к моделям:
Сетевое оборудование - HP-UX 11i v3 I/O Cards (101.86 kb)