Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Front of the 1U chassis Once the ER is powered up, proceed to the Login screen instructions. Serial Console Setup A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect the laptop to the rear of the chassis (see image below). Rear of the 1U chassis B. Power on the laptop. C. Power on the ER by dropping down the face plate and pressing the large button at the right of the front panel (see first image above). Once the ER is powered up, proceed to the instructions for HyperTerminal Setup Procedures. HyperTerminal Setup Procedures If using a serial console, follow these procedures to create a HyperTerminal session. A. Launch HyperTerminal by going to Start > Programs > Accessories > Communications > HyperTerminal: B. In the Connection Description dialog box, enter any session Name, and then click OK to open the Connect To dialog box: C. At the Connect using field, select the COM port assigned to the serial port on the laptop (probably “COM1”), and then click OK to open the Properties dialog box, displaying the Port Settings tab: D. Specify the following session settings: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware E. Click OK to connect to the HyperTerminal session: F. In the HyperTerminal session window, go to File > Properties to open the Properties dialog box, displaying the Connect To and Settings tabs: G. Click the Settings tab, and at the Emulation menu select “VT100”. H. Click OK to close the dialog box, and to go to the login screen. NOTE: If using a HyperTerminal session, the login screen will display with black text on a white background. Login screen The login screen displays after powering on the ER unit using a monitor and keyboard, or after creating a HyperTerminal session. NOTE: If the screensaver currently displays on your screen, press the Enter key to display the login screen. A. At the login prompt, type in menu. B. Press the Enter key to display the Password prompt. C. At the Password prompt, type in the following: #s3tup#r3k D. Press Enter to display the Quick Start menu screen. Quick Start menu screen A. At the Press the number of your selection prompt, press 2 to select the Quick Start setup process. B. At the login prompt, re-enter your password: #s3tup#r3k C. Press Enter to display the administration menu where you can begin using the Quick Start setup procedures. Quick Start menu: administration menu A. At the Press the number of your selection prompt, press 2 to select the “Quick Start Setup” process. The Quick Start menu takes you to the following configuration screens to make entries: Configure network interface LAN1 Configure default gateway Configure DNS servers Configure host name Time Zone regional setting NOTE: See the Network screens for Network Settings, and Regional Setting in Step 1B for content included in the Quick Start setup screens. B. After making all entries using the Quick Start setup procedures, press X to return to the Quick Start menu ...
Эта инструкция также подходит к моделям:Сетевое оборудование - ER3-100 (5K02-55) (3.8 mb)
Сетевое оборудование - ER3-100 (5K02-55) (3.8 mb)
Сетевое оборудование - ER3-200 (5K02-56) (3.8 mb)
Сетевое оборудование - ERH-100 (5K02-61) (3.8 mb)