Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
The LED remains on until the button is pressed a second time. Overheat/Fan Fail (icon) – This LED is unlit unless the chassis is overheated. NIC2 (icon) – A flashing green LED indicates network activity on LAN2. NIC1 (icon) – A flashing green LED indicates network activity on LAN1. HDD (icon) – In addition to displaying in the control panel, this icon also displays on the front panel on each hard drive carrier. A green LED indicates hard drive activity. An unlit LED on a drive carrier may indicate a hard drive failure. Power (icon) – The LED is unlit when the server is turned off. A steady green LED indicates power is being supplied to the unit’s power supplies. (See also Rear of Chassis.) Power (button) – When the power button is pressed, the main power to the server is turned on. When the power button is pressed again, the main power to the server is removed but standby power is still supplied to the server. Rear of Chassis UID (LED indicator) – On the rear of the chassis, to the left of the power supplies, a steady blue UID LED indicator displays when the UID button on the control panel is pressed. This LED remains lit until the UID button is pressed again. Power Supplies (LED indicators) – The power supplies are located at the right on the rear of the chassis. An LED indicator is located above each of the power plugs. Regulatory Specifications and Disclaimers Declaration of the Manufacturer or Importer Safety Compliance Europe: Low Voltage Directive (LVD) 73/23/EEC to CB Scheme EN 60950:2001 +A11 International: TUV/CB to IEC 60950-1:2001 +A11 1st Edition Electromagnetic Compatibility (EMC) USA: FCC CFR 47 Part 15, Verified Class A Limit Canada: IC ICES-003 Class A Limit China: China Compulsory Certification (CCC) GB4943-2001, GB9254-1998 (Class A), GB17625.1-2003 Europe: EMC Directive, 89/336/EEC & Low Voltage Directive (LVD) 73/23/EEC Federal Communications Commission (FCC) Class A Notice (USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Declaration of Conformity Models: 5K02-51, 5K02-52, 5K02-55, 5K02-56 Electromagnetic Compatibility Class A Notice Industry Canada Equipment Standard for Digital Equipment (ICES-003) China Compulsory Certification (CCC) - China EC Declaration of Conformity European Community Directives Requirement (CE) Declaration of ConformityManufacturer’s Name:8e6 TechnologiesManufacturer’s Address:828 W....
Эта инструкция также подходит к моделям:Сетевое оборудование - ER3-200 (5K02-56) (3.8 mb)
Сетевое оборудование - ER3-100 (5K02-55) (3.8 mb)
Сетевое оборудование - ER3-100 (5K02-55) (3.8 mb)
Сетевое оборудование - ER3-200 (5K02-56) (3.8 mb)