MOUNTING OF PROTECTOR To meet the applicable safety provisions, only the tool/protector combinations as described in the table must be used. Use genuine DOLMAR cutter blades or nylon cutting head. The cutter blade must be well sharpened, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately. MS-260 U/261 U MS-330 U/331 U MS-230 C/231 C MS-260 C/261 C MS-330 C/331 C to Engine 20 Star Blade Eddy Blade Protector for me

You are responsible for presenting your small off-road engine to an authorized service dealer or equipment manufacturer to whom Dolmar would sell engines as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30days. If you have a question regarding your warranty coverage, you should contact Dolmar Warranty Service Department at 1888- OPE-PART for the information. DOLMAR GmbH North American Division Emission Control Defects Warranty

Sleeltoed safety boots are recommended. OFF/STOP 4 5 SAFETY INSTRUCTIONS General Instructions - To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Brush Cutter/String Trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling. - It is recommended only to lend the Brush Cutter/String Trimmer to people who have proven to be experienced with Brush Cutter/String Trimmer. Always

Use only approved fuel storage containers. CORRECT HANDLING OF MACHINE Attachment of shoulder strap Always wear the shoulder strap and adjust the strap length so that the cutter blade is kept parallel with the ground. Detachment The shoulder strap has a quick release latch. In an emergency, pull the red strap (A) to detach the machine from you. Be extremely careful to maintain control of the machine at this time. Do not allow the machine to be deflected toward you or anyone in the work vicinity.

Use genuine DOLMAR cutter blades or nylon cutting head. The cutter blade must be well sharpened, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately. MS-260 U/261 U MS-330 U/331 U MS-230 C/231 C MS-260 C/261 C MS-330 C/331 C to Engine 20 Star Blade Eddy Blade Protector for metal blades Nylon cutting head Protector for cord cutter Sharpen or replace the cutter blade every three (3) hours of operation. If the nylon

- Inspect the cutting tool at short regular intervals for damage ( Detect hairline cracks by means of tapping-noise test ). - Operate the Brush Cutter/String Trimmer only with the shoulder strap provided. It should be suitably adjusted before using the Brush Cutter/String Trimmer. Adjust the should strap according to the user’s size to prevent fatigue during operation. Never hold the Brush Cutter/String Trimmer with one hand during use. - During operation always hold the Brush Cutter/String Trim

Cutting Tools Use only the correct cutting tool. • Resting • Transport • Refuelling • Maintenance • Tool Replacement Caution: Kickback Diagrammatic figure Diagrammatic figure Maintenance instructions -The condition of the Brush Cutter/String Trimmer must be checked before operation, in particular of the cutting tool, the protective devices and also the shoulder strap. Special attention must be paid to the cutting blade which must be correctly sharpened. -Stop the engine and remove spark plug con

Always wear protective gloves. Do not attempt to remove the recoil starter by yourself, which may cause an accident. It should be done by the Authorized Service Agent. To ensure a long service life and to avoid any damage to the machine, the following servicing operations should be done at regular intervals. Daily checkup and maintenance Before operation, check the machine for loose screws or missing parts. Pay your special attention to the tightness of the cutting tool. Before operation, always

Clean or replace. Engine starts but soon stops Fuel supply Tank filled Incorrect idle-adjustment, Carburetor contaminated Defective tank, fuel supply line interrupted, cable or I-O switch defective. Insufficient performance Several systems Poor engine idling Air filter contaminated, carburetor contaminated, muffler clogged, exhaust duct in the cylinder clogged 14 FRANCAIS Merci d'avoir fait l'achat de cette debroussailleuse ou de ce taille-bordures DOLMAR. Nous sommes heureux de recommander cett

Importante: Leer cuidadosamente este manual de instrucciones antes de poner en marcha la maquina y observar estrictamente las normes de seguridad. Conservar este manual de instrucciones con cuidado. Brush Cutter Debroussailleuse Desbrozadora MS-260 U MS-261 U MS-330 U MS-331 U String Trimmer Taille-bordures Cortabordes MS-230 C MS-231 C MS-260 C MS-261 C MS-330 C MS-331 C ENGLISH Thank you very much for purchasing DOLMAR Brush Cutter/String Trimmer. We are pleased to recommend to you the DOLMAR